PEEK Metal Detectable Sheet
- Chemical Family
- Polyether Ether Ketone (PEEK)
PAR Group Peek Metal Detectable Sheet is an ideal solution for machined components which are subject to multiple sterilizations, such as CIP (cleaning in place) and SIP (sterilization in place) applications. It is suitable for food approved components which require increased stiffness without the need for reinforcement. It contains very fine material additives making it detectable to most metal detector scanning equipment. Our blue metal detectable PEEK also contains a solid lubricant which provides better sliding properties over standard PEEK products.
Properties
- Physical Form
- Sheets
Product families
- Industrial — Other Industrial Applications
- Powertrain & UTH
- Equipment & Parts
- Other Industrial Applications
- Other Pharmaceutical Manufacturing Applications
- Food & Beverage Manufacturing
Other characteristics
- Brand
- PAR Group PEEK
- Density
- 1460.0 - 1460.0 kg/m³
- Features
Dimensional Stability, Excellent Hydrolysis Resistance, Good Impact Strength, Good Machinability, Good Sliding Properties, Good Stiffness, Wear Resistant
- Polymer Name
- Polyetheretherketone (PEEK)
- Tensile Modulus
- 4000.0 - 4000.0 MPa
- Markets
- Automotive & Transportation
- Food & Nutrition
- Healthcare & Pharma
- Industrial
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Product Families
- Plastics — Parts, Shapes & Films
- Additives Included
- Lubricant (Unspecified)
- Material Features
- Dimensional Stability
- Excellent Hydrolysis Resistance
- Good Impact Strength
- Good Machinability
- Good Sliding Properties
- Good Stiffness
- Wear Resistant
- Key Features
Temperature: Up to -10°C up to +250°C.; High dimensional stability for high precision components.; Enhanced impact / stiffness ratio.; Extremely good wear resistance properties.; Contains additives that are identifiable in metal detector scanning equipment.; Also detectable by X-ray equipment.; Excellent resistance to chemicals, steam and hydrolysis.; Food approved.
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Pistons
- Thrust Washer
Technical data
Table 1 of 4
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 92 | MPa | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Yield | 5 | % | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Break | 6 | % | ISO 527-1/-2 (7) |
| Tensile Modulus of Elasticity | 4000 | MPa | ISO 527-1/-2 (9) |
| Shear Strength | 10706 | PSI | ASTM D732 |
| Compressive Stress at 1 / 2 / 5 % Nominal Strain | 39 / 74 / 127 | MPa | ISO 604 (10) |
| Compressive Strength | 20198 | PSI | ASTM D696 (11) |
| Charpy Impact Strength - Unnotched | 28 | kJ/m2 | ISO 179-1/1eU |
| Charpy Impact Strength - Notched | 3.3 | kJ/m2 | ISO 179-1/1eA |
| Izod Impact Notched | 0.6 | ft.lb./in | ASTM D256 |
| Flexural Strength | 21590 | PSI | ASTM D790 (13) |
| Flexural Modulus of Elasticity | 627 | KSI | ASTM D790 |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.46 | g/cm3 | ISO 1183-1 |
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Wear Rate | 3.2 | μm/km | ISO 7148-2 (18) |
| Dynamic Coefficient of Friction | 0.30 - 0.60 | — | ISO 7148-2 (18) |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (DSC, 10°C (50°F) / min) | 340 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion (23 to 60°C) (73 to 140°F) | 49 | μm/(m.K) | — |
| Coefficient of Linear Thermal Expansion (23 to 100°C) (73 to 210°F) | 54 | μm/(m.K) | — |
| Heat Deflection Temperature | 185 | °C | ISO 75-1/-2 |
| Continuous Allowable Service Temperature in Air (20,000 hours) (3) | 250 | °C | — |
| Min. Service Temperature (4) | -10 | °C | — |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Flammability (3mm (1/8 in.)) (5) | V-0 | UL 94 |
