PAR Group Acetal Sheet - Blue Food Quality
PAR Group Acetal Sheet - Blue Food Quality offers similar properties to Acetal Sheet. It is blue in color making it popular for use in the food, drink and pharmaceutical sector. Acetal sheet is a food safe product and is available to buy online at PAR Direct by clicking the link above.
Properties
- Physical Form
- Sheets
Product families
- Structural Components
- Equipment & Parts
- Housings & Enclosures
- Terminal Blocks Plugs & Sockets
Other characteristics
- Color
- Black, Blue, Natural
- Black
- Blue
- Natural
- Density
- 1630.0 - 1630.0 kg/m³
- Features
Chemical Resistant, Crystalline, Dimensional Stability, Electrically Insulating, Excellent Hydrolysis Resistance, Excellent Mechanical Strength, Good Machinability, Good Sliding Properties, Good Thermal Stability, High Impact Resistance, Low Water Absorption, Smooth Surface Finish, Wear Resistant
- Polymer Name
- Polyacetal Copolymer (POM)
- Tensile Modulus
- 3200.0 - 3200.0 MPa
- Markets
- Building & Construction
- Electrical & Electronics
- Industrial
- Availability
- Also available: Acetal Rod - Blue Food Quality.
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Chemical Resistant
- Crystalline
- Dimensional Stability
- Electrically Insulating
- Excellent Hydrolysis Resistance
- Excellent Mechanical Strength
- Good Machinability
- Good Sliding Properties
- Key Features
Temperature: -50°C to +100°C (+140°C short term).; Good sliding properties and very good electrical insulation properties.; Easily machined and offers high wear resistance.; Low water absorption.; Excellent impact resistance and mechanical strength.
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Bearings
- Food Containers
- Housings
- Plugs
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.63 | g/cm3 | ISO 1183-1 |
| Wear Rate | 100 | μm/km | ISO 7148-2 (18) |
| Dynamic Coefficient of Friction | 0.30 - 0.64 | — | ISO 7148-2 (18) |
Table 2 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 55 | MPa | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Yield | 14 | % | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Break | 15 | % | ISO 527-1/-2 (7) |
| Tensile Modulus of Elasticity | 3200 | MPa | ISO 527-1/-2 (9) |
| Compressive Stress at 1 / 2 / 5 % Nominal Strain | 25 / 44 / 75 | MPa | ISO 604 (10) |
| Charpy Impact Strength - Unnotched | 60 | kJ/m2 | ISO 179-1/1eU |
| Charpy Impact Strength - Notched | 4 | kJ/m2 | ISO 179-1/1eA |
| Rockwell M Hardness (14) | 79 | — | ISO 2039-2 |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (DSC, 10°C (50°F) / min) | 170 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion (23 to 60°C) (73 to 140°F) | 125 | μm/(m.K) | — |
| Coefficient of Linear Thermal Expansion (23 to 100°C) (73 to 210°F) | 160 | μm/(m.K) | — |
| Heat Deflection Temperature | 120 | °C | ISO 75-1/-2 |
| Continuous Allowable Service Temperature in Air (20,000 hours) (3) | 90 | °C | — |
| Min. Service Temperature (4) | -20 | °C | — |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Flammability (3mm (1/8 in.)(5) | HB | UL 94 |
