Nylon 6 Extruded Sheet
- Chemical Family
- Polyamides
PAR Group Nylon 6 Extruded Sheet is a popular engineering plastic that offers high strength, stiffness and hardness enabling it to be easily machined and precision engineered. It also has good wear and creep resistance making it suitable for a wide range of applications. Nylon 6 sheet - extruded also has good heat aging properties, is electrically insulating and is resistant to the majority of oils, chemicals, fuels and cleaning fluids. Nylon 6 sheet - extruded is available to buy online at PAR Direct by clicking the link above.
Properties
- Physical Form
- Sheets
Product families
- Equipment & Parts
- Other Industrial Applications
- Other Parts & Components
- Terminal Blocks Plugs & Sockets
Other characteristics
- Brand
- PAR Group Nylon 6
- Density
- 1150.0 - 1150.0 kg/m³
- Features
Chemical Resistant, Creep Resistant, Electrically Insulating, Good Machinability, Good Stiffness, Heat Aging Resistant, High Hardness, High Impact Resistance, High Strength, Wear Resistant
- Polymer Name
- Polyamide 6 (PA 6)
- Markets
- Electrical & Electronics
- Industrial
- Availability
- Yes denotes available No denotes unavailable
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Chemical Resistant
- Creep Resistant
- Electrically Insulating
- Good Machinability
- Good Stiffness
- Heat Aging Resistant
- High Hardness
- High Impact Resistance
- Key Features
Temperature: -40°C up to +85°C (+160°C short term).; Combines high strength and stiffness with good wear resistance properties.; Good electrical insulation properties.; Good resistance to chemicals and oils.; Easily machined.
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Bearings
- Gears
- Industrial Connectors
- Pulleys
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Sample Type 1B, 50mm min^-1) | 85 (12328) | MPa / psi | ISO 527-1/2:1993 |
| E-modulus | 4100 (594656) | MPa (psi) | ISO 527-1/2:1993 |
| Elongation at Break (Sample Type 1B, 50mm min^-1) | min. 20 | % | ISO 527-1/2:1993 |
| Compressive Strength (Sample Type B, 5mm min^-1) | 105 (15229) | MPa (psi) | ISO 604:2002 |
| Compressive Modulus (Sample Type A, 1mm min^-1) | 3000 (435114) | MPa (psi) | ISO 604:2002 |
| Flexural Strength (1.5mm min^-1) | 115 / 16679 | MPa (psi) | ISO 178:2001 |
| Flexural Modulus (1.5mm min^-1) | 3700 / 536641 | MPa (psi) | ISO 178:2001 |
| Izod Impact Strength (Sample Type A (Notched)) | 4.50 (2.14) | KJ/m2 ( ft.lb/in2 ) | ISO 180:2000 |
| Hardness | 85 | Shore D | ISO 868:2003 |
| Coefficient of Friction (Dynamic,31.4m/min, 1.75MPa) | 0.25 | — | — |
Table 2 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.150 (0.042) | g/cm3 (lb/inch3) | ISO1183:1987 |
| Water Absorption (24 hours,Immersion, 23°C) | 0.2 | % | ISO 62:1999 (modified) |
| Water Absorption (Saturation, Immersion, 23°C) | 6 | % | ISO 62:1999 |
Table 3 of 5
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature | 220 (428) | °C (°F) | — |
| Heat Deflection Temp. HDT/A (1.80MPa) | 210 / 410 | °C / °F | ISO 75 |
| Heat Deflection Temp. HDT/B (0.45MPa) | 220 / 428 | °C / °F | ISO 75 |
| Max. Intermittent Service Temp | 170 (338) | °C (°F) | — |
| Max. Continuous Service Temp (5000hrs) | 105 (221) | °C (°F) | — |
| Min. Intermittent Service Temp. | -100 (-148) | °C (°F) | — |
| Min. Continuous Service Temp. | -40 (-40) | °C (°F) | — |
| Coefficient of Linear Thermal Expansion (TMA,23°C to 55°C) | 8x10^-5 (4.44x10^-5) | °C-1 (°F-1) | ISO 11359-2:1999 |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant (1MHz) | 3.7 | — | IEC 60250:1969-01 |
| Dielectric Constant (Low Frequency,100Hz) | 4 | — | — |
| Dielectric Strength | 25 (635) | kV/mm (Kv/in) | IEC 60243-1:1998-01 |
| Volume Resistivity | 1x10^13 (3.93x10^14) | ohm.m (ohm.in) | IEC 60093:1980-01 |
| Surface Resistivity ROA | 1x10^12 | ohm | IEC 60093:1980-01 |
| Comparative Tracking Index | 600 | CTI | IEC 60112:2003-01 |
Table 5 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Flammability | HB | IEC 60695-11-10:2003-08 |
