To catalogue
Miracll Chemicals E 165D
- Chemical Family
- Polyurethanes (PU)Thermoplastic Polyurethanes (TPU)
Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.
Product families
Applications
Applications
- Consumer Goods — Footwear
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
- Cooling & Climate
- Fuel Systems
- Other Automotive Applications
- Powertrain & UTH
- Seating
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Healthcare & Pharma — Medical
- Tubing & Fluids Handling
Printing & Packaging — Packaging
- Industrial & Transport Packaging
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Urethanes (TPU)
Other characteristics
- End Uses
Automotive Applications, Belts/Belt Repair, Cables, Film, Footwear, Fuel Pipes, Gaskets, Hoses, Seats, Tubes, Wires
- Polymer Name
- Thermoplastic Polyurethane (unspecified)
- Processing Methods
- Compounding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Features
- Good Abrasion Resistance
- Oil and Chemicals Resistance
- Good Resilience Performance
- Outstanding Mechanical Properties
- High Burst Pressure
- Technology
- Elastomers
- Material Features
- Chemical Resistant
- Good Abrasion Resistance
- Good Mechanical Properties
- Oil Resistant
- Superior Resiliency
- Plastics and Elastomers End Uses
- Automotive Applications
- Belts/Belt Repair
- Cables
- Film
- Footwear
- Fuel Pipes
- Gaskets
- Hoses
- Plastics and Elastomers Processing Methods
- Compounding
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 65 | Shore D | ASTM D2240 |
| 100% Modulus | 22 | MPa | ASTM D412 |
| 300% Modulus | 40 | MPa | ASTM D412 |
| Elongation At Break | 350 | % | ASTM D412 |
| Tear Strength | 200 | kN/m | ASTM D624 |
| DIN Abrasion Loss | 35 | mm3 | DIN 53516 |
| Tg | -22 | ° C | DSC |
| Compression Set For 72 hours at 23° C | 30 | % | ASTM D395 |
| Compression Set For 22 hours at 70° C | 38 | % | ASTM D395 |
| Density | 1.21 | g/cm3 | ASTM D792 |
| Tensile Strength | 55 | MPa | ASTM D412 |
