To catalogue
Miracll Chemicals E 95
- Chemical Family
- Polyurethanes (PU)Thermoplastic Polyurethanes (TPU)
Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.
Product families
Applications
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
- Chassis & Brake
- Cooling & Climate
- Fuel Systems
- Powertrain & UTH
- Seating
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Healthcare & Pharma — Medical
- Tubing & Fluids Handling
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Urethanes (TPU)
Other characteristics
- End Uses
Automotive Components, Bellows, Cables, Fuel Pipes, Gaskets, Hoses, Seats, Tubes, Wires
- Polymer Name
- Thermoplastic Polyurethane (unspecified)
- Processing Methods
- Compounding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Features
- Excellet Hydrolysis Resistance
- Low Compression Set
- Oil Resistance
- Chemicals Resistance
- Good Abrasion Resistance
- High Resilience Property
- Technology
- Elastomers
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Good Abrasion Resistance
- Good Solvent Resistance
- High Resilience
- Low Compression Set
- Oil Resistant
- Plastics and Elastomers End Uses
- Automotive Components
- Bellows
- Cables
- Fuel Pipes
- Gaskets
- Hoses
- Seats
- Tubes
- Plastics and Elastomers Processing Methods
- Compounding
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 100% Modulus | 11 | MPa | ASTM D412 |
| 300% Modulus | 26 | MPa | ASTM D412 |
| Compression Set For 22 hours at 70° C | 47 | % | ASTM D395 |
| Compression Set For 72 hours at 23° C | 32 | % | ASTM D395 |
| DIN Abrasion Loss | 30 | mm3 | DIN 53516 |
| Elongation At Break | 400 | % | ASTM D412 |
| Hardness | 95 | Shore A | ASTM D2240 |
| Tear Strength | 160 | kN/m | ASTM D624 |
| Tg | -30 | ° C | DSC |
| Density | 1.2 | g/cm3 | ASTM D792 |
| Tensile Strength | 50 | MPa | ASTM D412 |
