Cutting and Grinding Fluids CG 4250
Cutting and Grinding Fluids CG 4250 is a light oil film rust preventative designed to protect parts stored indoors for up to 1 year. The light oil coating is not easily disturbed during shipping and handling and possesses residual protective characteristics even if part of the compound is wiped or rubbed from the metal surface. Due to surface-active ingredients, the coating will creep over uneven or unclean surfaces to insure a continuous film. Thus it can be used on porous metals and parts with deep crevices insuring 100% coverage.
Product families
Applications
- Other Industrial Coatings
Product Families
- Protective Coatings
Other characteristics
- Features
- Corrosion Resistant, Non Corrosive
- Compatible Substrates & Surfaces
- Brass, Metal, Zinc
- Markets
- Paints & Coatings
- Storage
CG 4250 should be stored at room temperatures (between 55 to 95 °F). Keep away from sparks, open flames, and other sources of ignition as product and empty containers could contain combustible, flammable, or ignitable substances. Do not weld or cut empty drums.
- Shelf LIfe
- 12+ Months (Indoor)
- Product Note
CG 4250 should be applied to parts that are relatively dry, as the water displacing characteristics are limited with this product. CG 4250 should also be avoided if small parts are to be coated and stacked in boxes for storage, as the oily film is thick enough to collect on the surface of small parts and may cause issues during assembly. CG 4250 is to be used straight, do not cut back further with solvent or mix with water.
- Technology
- Ready-to-Use Products
- Ready to Use Product Features
- Corrosion Resistant
- Non Corrosive
- Compatible Substrates and Surfaces
- Brass
- Metal
- Zinc
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluid Type | Rust Preventative | — | — |
| Specific Gravity | 0.84 | — | — |
| Flash Point: | 105.0 | °F | — |
| ASTM Color | 2.5 | — | — |
| Water Displacement | Limited | — | — |
| Humidity Cabinet | 30 Days | — | ASTM D 1748 |
| Salt Spray (5%) | Not Formulated for Salt Spray Protection | — | ASTM B117 |
| Acid Atmosphere Protection | Not Formulated for Acidic Atmosphere | — | — |
| Nickel Metal Reactivity | No reaction in laboratory, test in field | — | — |
| Application | Parts may be sprayed or dipped | — | — |
