TABOCAB® TPG 002
The HFFR compound product range is a group of thermoplastic, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers. These compounds are used to produce cable insulation and sheathing. These compounds are developed to be easy to process and for optimally high productivity. The individual compounds are designed depending on the type of end cable application so that these retain their thermo-mechanical properties and a high level of fire retardancy, and therefore provide a solution with greater protection of people and property in case of fire.
Product families
Applications
- Building & Construction — Other Building & Construction Applications
- Building Wires & Power Cables
Product Families
- Other Basic Thermoplastics
Other characteristics
- Brand
- TABOCAB
- Density
- 1520.0 - 1520.0 kg/m³
- Processing Methods
- Extrusion
- Markets
- Building & Construction
- Electrical & Electronics
- PACKAGING
Compounds are supplied in 600 kg and 1 000 kg packaging in octabins on wooden pallets.
- Processing
We recommend that these compounds be processed using low-compression extrusion machines. They can also be processed using screw extruders for PVC, but with the expectation of lower performance. Individual process and technical parameters are given in the specific TDS for the HFFR compounds.
- Technology
- Plastics
- Packaging Type
- Super Sacks
- Labeling Claims
- Halogen-free
- Quality Standards
- EN 50363-7 TI6
- EN 50363-7 TI7
- EN 50363-8 TM7
- IEC 60092
- IEC 60502
- VDE 0207/24 HM2
- VDE 0207/24 HM4
- VDE 0250/215 HM5
- Material Features
- Flame Retardant
- Low Toxicity
- Self Extinguishing
- Storage Condition
The compounds must be stored in dry, covered areas at ambient temperatures not exceeding 30°C. The compounds must be stored in their original, undamaged packaging as supplied by the SILON s.r.o. manufacturer. They must not be exposed to moisture, sunlight or thermal radiation. The maximum compound storage period is usually 9 months from the date of manufacture marked on the product packaging.
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 44 | Shore D |
| Density | 1.52 | g/cm³ |
| Elongation at break | 180 | % |
| LOI | 37 | % |
| MFI (150°C/21,6) | 7.5 | g/10 min |
| Tensile Strength | 13 | MPa |
