CHEM-THANE DCP FLEX ZERO VOC
CHEM-THANE DCP FLEX ZERO VOC primer sealer/finish coatings, pigmented or clear, being self-priming, both decorative and protective, are a new generation of fast-curing, two-component, polyaspartic products for interior or exterior use over properly prepared concrete, metal, mineral substrates, and certain plastics. For application to wood surfaces, contact manufacturer. They have excellent penetration and bond strength to properly prepared surfaces and are UV resistant with flexible properties. They have good splash and chemical-spill-resistant properties involving commercial and household cleaners, pool water treatment products, and hot tires.
Product families
- Primers & Sealers
- Protective Coatings
Other characteristics
- Brand
- CHEM-THANE
- Features
Abrasion Resistant, Excellent Stain Resistance, Excellent Substrate Adhesion, Fast Curing, Flexible, Good Optical Properties, Impact Resistance, Low Odor, Low Temperature Curing, Matte Gloss Capable, Self-Priming, UV Resistant, Wear Resistant
- Product Type
- 2K (2 component) Coating, Primer
- 2K (2 component) Coating
- Primer
- Application Area
Aircraft Hangers, Floor Coverings, Pet Enclosures; Aircraft Hangers; Floor Coverings; Pet Enclosures
- Application Method
- Roller
- Compatible Substrates & Surfaces
- Concrete, Masonry, Metal, Plastics
- Safety
Polyaspartic aliphatic polyurea products contain chemical ingredients that are considered hazardous.
- Markets
- Automotive & Transportation
- Building & Construction
- Product Data
- Type of Material
- Aliphatic Polyaspartic
- Estimated Coverage
- 1155 theoretical square feet per gallon at 1 mil DFT
- Method of Application
- Roller application is recommended. The roller must have an industrial-grade, phenolic-resin core with a synthetic-nap or lambs-wool cover, 1/8 to 3/8 inch nap, 18 inch width.
- Recoat time
- Minimum 1 hour, Maximum 48 hours
- Thinner and Clean Up Solvent
- Use Xylol or MEK. Do Not Use Alcohols.
- Mixing Ratio
- 1.0 part A; 1.0 part B
- Product Uses
Final clear sealer/finish over decorative concrete surfaces such as acid, color or dye stained, semi-polished concrete, polymer- modified cementitious overlayments, or seamless multi-build epoxy/color quartz flooring.; High foot traffic, along with certain types of vehicle and materialhandling equipment.; UV-resistant sealer/finish coat over safety surfacing systems or outdoor running tracks.
- Technology
- Ready-to-Use Products
- Labeling Claims
- HAPs-free
- VOC-free
- Application Methods
- Roller
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Time | min. 1 - 3 | hours |
| Flash Point (Base and Catalyst) | min. 100 | °F |
| Pot Life | 25 - 30 | minutes |
| Recommended Film Thickness | 2 - 6 | mils per coat |
| VOC Content | 0.0 | lbs/gal |
| Volume Solids | 72.0 | % |
