CHEM-THANE DCP UF
CHEM-THANE DCP UF primer sealer/finish coatings, pigmented or clear, being self-priming, both decorative and protective, are a new generation of fast-curing, two-component, polyaspartic products for interior or exterior use over properly prepared concrete, metal, mineral substrates, and certain plastics. For application to wood surfaces, contact manufacturer. They have excellent penetration and bond strength to properly prepared surfaces and are UV resistant with flexible properties. They have good splash and chemical-spill-resistant properties involving commercial and household cleaners, pool water treatment products, and hot tires. The UF version has a high degree of flexibility when compared to standard polyaspartic and is suitable for areas such as parking decks or other areas subject to movement or needing elongation in excess of 100%.
Product families
- Primers & Sealers
- Protective Coatings
Other characteristics
- Brand
- CHEM-THANE
- Features
Abrasion Resistant, Excellent Stain Resistance, Excellent Substrate Adhesion, Fast Curing, Good Optical Properties, High Elongation, Highly Flexible, Impact Resistance, Low Odor, Low Temperature Curing, Matte Gloss Capable, Self-Priming, UV Resistant, Wear Resistant
- Product Type
- 2K (2 component) Coating, Primer
- 2K (2 component) Coating
- Primer
- Application Area
Aircraft Hangers, Floor Coverings, Pet Enclosures; Aircraft Hangers; Floor Coverings; Pet Enclosures
- Application Method
- Roller
- Compatible Substrates & Surfaces
- Concrete, Masonry, Metal, Plastics
- Safety
Polyaspartic aliphatic polyurea products contain chemical ingredients that are considered hazardous.
- Markets
- Automotive & Transportation
- Building & Construction
- Product Data
- Type of Material
- Polyaspartic
- Estimated Coverage
- 1155 sq ft. per gallon/mil dft
- Method of Application
- Roller application is recommended. The roller must have an industrial-grade, phenolic-resin core with a synthetic-nap or lambs-wool cover, 1/8 to 3/8 inch nap, 18 inch width.
- Recoat time
- Minimum 1 hour, Maximum 48 hours
- Thinner and Clean Up Solvent
- Use Xylol or MEK. Do Not Use Alcohols.
- Mixing Ratio
- 1.0 part A; 1.0 part B
- Technology
- Ready-to-Use Products
- Labeling Claims
- HAPs-free
- VOC-free
- Application Methods
- Roller
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Time | min. 1 - 3 | hours |
| Flash Point (Base and Catalyst) | min. 100 | °F |
| Pot Life | 25 - 30 | minutes |
| Recommended Film Thickness | 2 - 6 | mils per coat |
| VOC Content | 1.8 | lbs/gal |
| Volume Solids | 72.0 | % |
