INTERCURE® 3
- CAS Number
- 140-73-8
- EC Number
- 205-429-9
- Chemical Name
- N,N'-hexamethylenebis(cinnamylideneamine), NN'-hexamethylenebis(cinnamylideneamine)
IIntercure® 3 is produced by IB Chem S.r.l. - INTERBUSINESS Group, is a blocked diamine cross-linking agent used for a very safe processing of Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (CO-ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 2.5 to 3.5 p.h.r. IIntercure® 3, may be used in combination with IIntercure® 1.
Properties
- Physical Form
- Powder
- Solid
Identification
- Molecular Formula
- C₂₄H₂₈N₂
Product families
Applications
- Pipes & Hoses
- Pipes & Plumbing
- Equipment & Parts
Product Families
- Catalysts Initiators & Crosslinkers
Other characteristics
- Brand
- INTERCURE
- Features
- Extremely Low Mean Particle Size, Low Odor
- Functions
- Crosslinking Agent
- Compatible Polymers & Resins
Epichlorohydrin (ECO), Ethylene Acrylic Elastomer (AEM), Fluoroelastomer (FKM), Polyacrylate Rubber (ACM)
- Odor
- Cinnamon
- Markets
- Agriculture & Feed
- Building & Construction
- Industrial
- Appearance
- Fine tan powder
- Soluble In
- Acids and Alcohols, Ketones, Acids and Alcohols
- Technology
- Elastomers
- Safety and Health
Contact may cause skin irritation and allergic skin reaction. Inhalation, ingestion, skin and eye contact should be avoided. Gloves, safety goggles, respirator masks and protective clothing should be worn when handling the powder. Local exhaust is recommended to remove dust. May form flammable dust-air mixtures. Avoid heat, sparks and open flames. Processing equipment should be well grounded.
- Storage Stability
Keep container tightly closed in a cool and dry place (23°C and 50% RH). After 24 months, retest before use.
- Material Features
- Extremely Low Mean Particle Size
- Low Odor
- TSCA Inventory Status
- Listed Vol.2, pag.755, of 1979
- REACH Registration No.
- 01-2120264125-62-0000
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- Compatible Polymers and Resins
- Epichlorohydrin (ECO)
- Ethylene Acrylic Elastomer (AEM)
- Fluoroelastomer (FKM)
- Polyacrylate Rubber (ACM)
- Plastics and Elastomers End Uses
- Hoses
- Pipe Seals
- Plastics and Elastomers Functions
- Crosslinking Agent
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Purity | min. 95 | % |
| Specific Gravity (25/4°C) | 1.07 - 1.11 | — |
| Decomposition Point | min. 85 | °C |
| Ash Content | max. 0.2 | % |
| Moisture Content | max. 0.5 | % |
| Particle Size (< 10μm) | min. 74 | % Volume |
| Particle Size (< 15μm) | min. 95 | % Volume |
| Particle Size (< 30μm) | 100 | % Volume |
