INTERCURE® 1
Intercure® 1 is produced by IB Chem S.r.l. - INTERBUSINESS Group, is a blocked diamine cross-linking agent used in Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.5 to 1.5 p.h.r.
Properties
- Physical Form
- Powder
- Solid
Identification
- Molecular Formula
- C₇H₁₆N₂O₂
Product families
Applications
- Pipes & Hoses
- Pipes & Plumbing
- Equipment & Parts
Product Families
- Catalysts Initiators & Crosslinkers
Other characteristics
- Brand
- INTERCURE
- Features
- Low Odor
- Functions
- Crosslinking Agent
- Compatible Polymers & Resins
Epichlorohydrin (ECO), Ethylene Acrylic Elastomer (AEM), Fluoroelastomer (FKM), Polyacrylate Rubber (ACM)
- Odor
- Slight amine
- Usage
NTERCURE®1, can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.
- Markets
- Agriculture & Feed
- Building & Construction
- Industrial
- Appearance
- Fine white powder
- Soluble In
- Water
- Insoluble In
- Alcohols
- Technology
- Elastomers
- Certification
INTERCURE®1 is needed when applications require F.D.A. approval.
- Safety and Health
Contact may cause skin or eye irritation. Inhalation, ingestion, skin and eye contact should be avoided. Gloves, safety goggles, respirator masks and protective clothing should be worn when handling the powder.Local exhaust is recommended to remove dust. May form flammable dust-air mixtures. Avoid heat, sparks and open flames. Processing equipment should be well grounded
- Storage Stability
Keep container tightly closed in a cool and dry place (23°C and 50% RH). After 24 months, retest before use.
- Material Features
- Low Odor
- Chemical Inventories
- TSCA Exempt (USA)
- TSCA Inventory Status
- Listed Vol.2, pag.333, of 1979
- REACH Registration No.
- 01-2120755360-60-0000
- Certifications and Compliance
- FDA Compliant
- ISO 9001
- REACH (Europe)
- Compatible Polymers and Resins
- Epichlorohydrin (ECO)
- Ethylene Acrylic Elastomer (AEM)
- Fluoroelastomer (FKM)
- Polyacrylate Rubber (ACM)
- Plastics and Elastomers End Uses
- Hoses
- Pipe Seals
- Plastics and Elastomers Functions
- Crosslinking Agent
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Purity | min. 99.5 | % |
| Specific Gravity (25/4°C) | 1.26 - 1.30 | — |
| Decomposition Point | min. 154 | °C |
| Ash Content | max. 0.05 | % |
| Moisture Content | max. 0.4 | % |
| Particle Size (< 10μm) | min. 85 | % Volume |
| Particle Size (< 15μm) | min. 95 | % Volume |
| Particle Size (< 30μm) | 100 | % Volume |
