Andisil® TL 10
Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Features
- Faster Tack Free TimeImproved Gelation
- CASE Ingredients Functions
- Catalyst
Other characteristics
- Brand
- Andisil
- Synonyms
Di-n-butyltin dilaurate, Dibutylbis(1-oxododecyloxy)stannane, Dibutylbis(laurato)tin, Dibutylbis(lauroyloxy)tin, Dibutylstannylene dilaurate, Dibutyltin didodecanoate, Dibutyltin n-dodecanoate, Tin dibutyl dilaurate
- Functions
Catalyst, Heat Stabilizer, Light Stabilizer, Stabilizer
- Compatible Polymers & Resins
Phenolic Resins, Polyamides, Polyurethanes (PU), Silicones
- Markets
- Adhesives & Sealants
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Paints & Coatings
- Appearance
- Colorless to yellow liquid
- Reactivity
Andisil® TL products are very stable in aqueous solutions, but in alkaline solutions at room temperature, hydrolysis will occur.
- Shelf LIfe
- 12 months
- Solubility
Andisil® TL products are soluble in most common solvents such as benzene, toluene, ethanol, acetone, ethyl acetate, chloroform, carbon tetrachloride, benzene, ethanol, petroleum ether and various industrial plasticizers.. Andisil® TL products are insoluble in water.
- Cure
- Chemical Cure
- Technology
- CASE Ingredients
- Elastomers
- Plastics
- Material Features
- Good Mechanical Properties
- HIGHLIGHTS
Promotes rapid gelation and tack-free dry time.; Improves mechanical properties in molded and slabstock foams.
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ECL (Korea)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- Shelf Life Storage
The shelf life, when the container is stored unopened and under proper conditions (at ambient temperatures or below 50 ºF - do not allow to freeze), is expected to be a minimum of twelve months. It is not recommended to store the product outdoors since the material can become contaminated with water or moisture over time due to weather conditions.
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point (at 12mmHg) | min. 204 | °C |
| Density (at 25ºC) | 1.07 | — |
| Flash Point | 113 | ºC |
| Refractive Index (at 25°C) | 1.471 | — |
| TIN Content | 17.0 - 19.0 | % |
