To catalogue
EPLAMID 6 NC L K B4
- Chemical Family
- Polyamides
Unfilled polyamide 6, externally and internally lubricated for injection molding
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Printing & Packaging — Packaging
- Food & Beverage Packaging
- Industrial & Transport Packaging
- Non-Food Consumer Packaging
- Other Packaging Materials
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- EPLAMID
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 2900.0 - 2900.0 MPa
- Processing Methods
- Injection Molding
- Notes
Eplamid 6 offers all primary properties of unreinforced PA6 used in all sectos of industry, super balance of thermal and mechanical properties, especially for thin wall and fast cycle applications.This material is available in natural and colors on request
- Markets
- Industrial
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- Lubricated
- Plastics and Elastomers End Uses
- Containers
- Cosmetic Packaging
- Industrial Applications
- Rigid Films
- Rigid Packaging
- Thin Walled Containers
- Thin Walled Packaging
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Unnotched izod impact (23°C) | No break | kJ/m² | ISO 180/1U |
| Flexural modulus (2mm/min) (23°C) | 2900 | MPa | ISO 178 |
| Flexural strength (2mm/min) (23°C) | 110 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 3200 | MPa | ISO 527-2 |
| Tensile strain at break (50mm/min) (23°C) | 20 | MPa | ISO 527-2 |
| Tensile stress at break (50mm/min) (23°C) | 80 | MPa | ISO 527-2 |
| Thermal conductivity | 0,33 | V | — |
| Unnotched charpy impact (23°C) | No break | kJ/m² | ISO 179/1eU |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold shrinkage- parallel/normal (3mm) | 1,0/1,2 | % | ISO 294-4 |
| Density (23°C) | 1,14 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
Table 3 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Notched izod impact (23°C) | max. 10 | kJ/m² | ISO 180/1A |
| Melting point | 222 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | max. 10 | kJ/m² | ISO 75-2/B |
Table 4 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Properties | 600 | V | EN 60112 |
