To catalogue
EPLAMID 6 FV0 NC Q1C001
- Chemical Family
- Polyamides
Flame retardant polyamide 6 for injection molding.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- EPLAMID
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 3000.0 - 3000.0 MPa
- Processing Methods
- Injection Molding
- Notes
Halogenated, compliance with RoHS derivatives, with rating UL94 V0 and glow-wire at 960°C, which is used in many sectors of industy and has excellent mechanical properties.This material is available in natural and colors on request
- Markets
- Industrial
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Material Features
- Flame Retardant
- Good Mechanical Properties
- Halogenated
- Certifications and Compliance
- RoHS Compliant
- UL 94
- Plastics and Elastomers End Uses
- Industrial Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Unnotched izod impact (23°C) | 75 | kJ/m² | ISO 180/1A |
| Flexural modulus (2mm/min) (23°C) | 3000 | % | ISO 527-2 |
| Flexural strength (2mm/min) (23°C) | 95 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 3300 | % | ISO 294-4 |
| Tensile strain at break (5mm/min) (23°C) | 15 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 60 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 80 | kJ/m² | ISO 179/1eA |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Determination of water content | 1,2/1,4 | % | ISO 1183 |
| Ash content | 0.2 | % | ISO 3451-4 |
| Density (23°C) | 1,31 | g/cm3 | ISO 1183 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temp. of deflection under load (1,80 MPa) | 85 | °C | ISO 75-2/B |
| Melting point | 220 | °C | ISO 179/1eU |
| Notched charpy impact (23°C) | 7 | kJ/m² | ISO 75-2/B |
| Notched izod impact (23°C) | 6 | kJ/m² | ISO 178 |
| Temp. of deflection under load (0,45 MPa) | 190 | °C | ISO 3146 |
Table 4 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Properties | max. 2 | V | EN 60112 |
