To catalogue
EPLAMID 6 CFR 10 BK Q1B001
- Chemical Family
- Polyamides
Polyamide 6, reinforced with 10% of carbon fiber, heat stabilized, lubricated for injection molding
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- EPLAMID
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Carbon Fiber
- Flexural Modulus
- 7000.0 - 7000.0 MPa
- Processing Methods
- Injection Molding
- Notes
Eplamid 6 carbon fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties
- Markets
- Industrial
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- Heat Stabilized
- Lubricated
- Plastics and Elastomers End Uses
- Industrial Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Unnotched izod impact (23°C) | 25 | kJ/m² | ISO 180/1U |
| Flexural modulus (2mm/min) (23°C) | 7000 | MPa | ISO 178 |
| Flexural strength (2mm/min) (23°C) | 210 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 8500 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 2 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 120 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 30 | kJ/m² | ISO 179/1eU |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold shrinkage- parallel/normal (3mm) | 0,5/0,8 | % | ISO 294-4 |
| Ash content | 10 | % | ISO 3451-4 |
| Density (23°C) | 1,17 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temp. of deflection under load (1,80 MPa) | 190 | °C | ISO 75-2/A |
| Melting point | 220 | °C | ISO 3146 |
| Notched charpy impact (23°C) | 6 | kJ/m² | ISO 75-2/B |
| Notched izod impact (23°C) | 5 | kJ/m² | ISO 180/1A |
| Temp. of deflection under load (0,45 MPa) | 210 | °C | ISO 75-2/B |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Properties | HB | EN 60695-11-10 |
