To catalogue
EPIMIX PBT GFR 10 NC Q1B001
- Chemical Family
- Polyesters
EPIMIX PBT GFR 10 NC Q1B001 is 10% glass fiber reinforced, heat stabilized and lubricated for injection molding.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- EPIMIX
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 3500.0 - 3500.0 MPa
- Processing Methods
- Injection Molding
- Note
EPIMIX PBT glass fiber reinforced grades are used in all sectors of industry, has and excellent surface finish, low warpage and all around excellent mechanical properties.This material is available in natural and colors on request
- Markets
- Industrial
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- Good Surface Finish
- Heat Stabilized
- Low Warpage
- Lubricated
- Plastics and Elastomers End Uses
- Industrial Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural modulus (2mm/min) (23°C) | 3500 | MPa | ISO 178 |
| Unnotched izod impact (23°C) | 35 | kJ/m² | ISO 180/1U |
| Flexural strength (2mm/min) (23°C) | 130 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 4700 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 3,5 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 95 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 40 | kJ/m² | ISO 179/1eU |
Table 2 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Ash content | 10 | % | ISO 3451-4 |
| Mold shrinkage- parallel/normal (3mm) | 0,3/1,0 | % | ISO 294-4 |
| Density (23°C) | 1,35 | g/cm3 | ISO 1183 |
Table 3 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting point | 225 | °C | ISO 3146 |
| Temp. of deflection under load (1,80 MPa) | 190 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | 6 | kJ/m² | ISO 75-2/B |
| Notched izod impact (23°C) | 5 | kJ/m² | ISO 180/1A |
| Temp. of deflection under load (0,45 MPa) | 220 | °C | ISO 75-2/B |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Properties | 400 | V | EN 60112 |
Table 5 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Properties | HB | EN 60695-11-10 |
