To catalogue
EPLAMID 6 GFR 25 NC Q1C501
- Chemical Family
- Polyamides
Polyamide 6, reinforced with 25% of glass fiber, heat stabilized, lubricated for injection molding.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- EPLAMID
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 7500.0 - 7500.0 MPa
- Processing Methods
- Injection Molding
- Notes
Eplamid 6 glass fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties.This material is available in natural and colors on request
- Markets
- Industrial
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- Heat Stabilized
- Lubricated
- Plastics and Elastomers End Uses
- Industrial Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Unnotched izod impact (23°C) | 65 | kJ/m² | ISO 180/1U |
| Flexural modulus (2mm/min) (23°C) | 7500 | MPa | ISO 178 |
| Flexural strength (2mm/min) (23°C) | 270 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 8500 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 3 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 175 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 70 | kJ/m² | ISO 179/1eU |
Table 2 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold shrinkage- parallel/normal (3mm) | 0,6/0,9 | % | ISO 294-4 |
| Ash content | 25 | % | ISO 3451-4 |
| Density (23°C) | 1,3 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Notched izod impact (23°C) | 11 | kJ/m² | ISO 180/1A |
| Melting point | 220 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | 12 | kJ/m² | ISO 75-2/B |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Properties | 550 | V | EN 60112 |
Table 5 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Properties | HB | ASTM D257 |
