To catalogue
Ilkalem AS P-1016
- Chemical Family
- Unsaturated Polyester (UPE)
Ilkalem AS P-1016 is ortho unsaturated polyester resin for GRP applications.
Product families
Applications
Applications
- Consumer Goods — Furniture
- Consumer Goods — Housewares
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
- Chassis & Brake
Building & Construction — Building Materials
- Other Building Materials
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Automotive & Transportation — Transportation
- Marine
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- End Uses
Automotive Components, Cabinets, Construction Applications, Furniture, Marine Applications, Tanks
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Filament Winding, Hand Lay-up, Spray Lay-up
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Industrial
- Properties
- Easy and quick fiber wetting
- High mechanical strength
- Highly reactive
- Suitable for mass production
- Application
- Hand lay-up, Spray-up, Filament winding
- Availability
Pre-accelerated type can be produced upon request.
- Technology
- Composite Materials
- Composites End Use
- Cabinets
- Furniture
- Tanks
- Material Features
- Excellent Mechanical Strength
- General Purpose
- Good Reactivity
- Low Shrinkage
- Rapid Wetting
- Field of Application
- Car, bus and truck body parts
- Boats and other sea vehicles
- Modular cabinet
- Water tank.
- Decorative FRP furniture
- Construction materials
- Technical Properties
- Curing system - 1% Co(1%)+1%MEK P
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Filament Winding
- Hand Lay-up
- Spray Lay-up
- Plastics and Elastomers End Uses
- Automotive Components
- Construction Applications
- Marine Applications
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 55 - 65 | MPa | — |
| Tensine Elongation | 1 - 2 | % | — |
| Tensile E-Modulues | 4000-5000 | MPa | — |
| Flexural Strength | 140 - 150 | MPa | — |
| Hardness | 40 - 42 | — | GYZJ 934-1 |
| Heat Distortion Temperature | 72 - 75 | °C | — |
| Water Absorption | 36 - 38 | mg | — |
Table 2 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 750-1100 | cps |
| Thixotropy | Yes | — |
| Density | 1.10 - 1.11 | g/cm3 |
| Monomer Content | 39 - 41 | % |
| Acid Value | 18 - 24 | mgkOH/g |
| Gel Time | 10 - 15 | min |
| Exothermic Peak | 165-185 | °C |
