To catalogue
Ilkalem AS IR-110T
- Chemical Family
- Unsaturated Polyester (UPE)
Ilkalem AS IR-110T is ISO thixotropic unsaturated polyester resin for GRP applications.
Product families
Applications
Agriculture & Feed — Agricultural Films
- Pipes & Hoses
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
Building & Construction — Building Materials
- Other Building Materials
- Pipes & Plumbing
- Pools & Landscaping
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Automotive & Transportation — Transportation
- Marine
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- End Uses
Automotive Components, Construction Applications, Marine Applications, Pipes, Pools, Tanks
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Filament Winding, Hand Lay-up
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Building & Construction
- Industrial
- Properties
- High UV and environmental strength
- Easy and quick fiber wetting
- Resistant to chemical environment
- High mechanical strength and HDT
- No dripping during vertical application
- Application
- Hand lay-up, Spray-up
- Technology
- Composite Materials
- Composites End Use
- Pools
- Tanks
- Material Features
- Chemical Resistant
- Low Shrinkage
- Rapid Wetting
- Field of Application
- Car, bus and truck body parts
- Boats and other sea vehicles
- Pools and water slide equipments
- Chemical material storage tanks
- Pool filters
- Construction materials
- Technical Properties
- Curing system - 1% MEK-P, pre-accelerated
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Filament Winding
- Hand Lay-up
- Plastics and Elastomers End Uses
- Automotive Components
- Construction Applications
- Marine Applications
- Pipes
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 55 - 65 | MPa | — |
| Tensine Elongation | 1 - 2 | % | — |
| Tensile E-Modulues | 4000-5000 | MPa | — |
| Flexural Strength | 95 - 105 | MPa | — |
| Hardness | 40 - 42 | — | GYZJ 934-1 |
| Heat Distortion Temperature | 85 - 88 | °C | — |
| Water Absorption | 33 - 35 | mg | — |
Table 2 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 500-1000 | cps |
| Thixotropy | Yes | — |
| Density | 1.07 - 1.09 | g/cm3 |
| Monomer Content | 43 - 45 | % |
| Acid Value | 11 - 20 | mgkOH/g |
| Gel Time | 10 - 18 | min |
| Exothermic Peak | 170 - 180 | °C |
