P & P Technology SE510FR UL94V0
- Chemical Family
- Silicones
P & P Technology SE510FR UL94V0 is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.
Properties
- Physical Form
- Sheets
Product families
- Equipment & Parts
- Other Devices & Assemblies
- Housings & Enclosures
- Other Parts & Components
- Jacketing & Insulation
Other characteristics
- End Uses
Electrical Parts, Electronic Insulation, Housings
- Features
- Electromagnetic Shielding (EMI), Flame Retardant
- Polymer Name
- Silicone Elastomer
- Markets
- Electrical & Electronics
- Industrial
- Availability
Sheeting is available instandard rolls of width 1 meter andLength 10 meters; other widths or lengths can be produced on request. The scope of the ULapproval for these products limits the minimum dimensions and colors that can bemanufactured, for further information please contact P & P Technology Ltd
- Flame Rating
- UL 94 V0
- Technology
- Elastomers
- Specification
These products have been specifically formulated for and hold approval to the flammabilityrequirements of the UL94 V0 specification. The UL file number for these materials isE23 5077. As V0 is the most demanding of the UL94 vertical burn tests, these grades may alsobe used in applications where V1 or V2 rating is required. These products meet theflammability requirements of FAR251JAR 25?CS 25 Appendix F, Part 1 (a)(1)(i), (a)(1)(ii)vertical and (a)(1)(iv), (a)(1)(v) horizontal flammability tests.
- Product Families
- Elastomers — Parts & Shapes
- Material Features
- Electromagnetic Shielding (EMI)
- Flame Retardant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Electrical Parts
- Electronic Insulation
- Housings
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 220±301 | kg/m³ | BSEINSO 845 *25mm sample |
| Density | 400±60 | kg/m³ | BSEINSO 845 **3mm sample |
| Compression Stress (40% strain) | 70± 20 | kpa | BSEINSO 3386 Part 1 25mm sample |
| Compression Set (24 hours at 70°C) | max. 15 | 10 | BSEINSO 1856 Type A |
