P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK
- Chemical Family
- Silicones
P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK is an electrically conductive composite material comprising of silicone elastomer and silver plated copper particles. It is designed to be easily applied to panel joints &seams and/or the small clearances that result from non-continuous mechanical fixing in sheet metal enclosures. On application it cures at room temperature to form a highly conductive elastomeric section / joint that has good adhesion to most commonly used metals &substrates. When fully cured it will prevent water ingress and improve the EMI shielding performance of panel joints &overlaps.
Product families
Applications
- Equipment & Parts
- Other Devices & Assemblies
- Housings & Enclosures
- Other Parts & Components
- Jacketing & Insulation
Product Families
- Adhesives
Other characteristics
- Functions
- Adhesive, Surface Finish
- Usage
AS-SCS001 has excellent high temperature resistance and long-term aging characteristics. The silver plated filler used in this material is provides a reliable low impedance connection between suitably prepared metallic surfaces.
- Markets
- Electrical & Electronics
- Industrial
- PACKAGING
AS-SCS001can be supplied in 30ml and 55ml dispense barrels, both of which incorporate luerlock fastenings at the nozzle that allow a wide range of dispense tips to be easily attached or detached. For larger scale applications it can be supplied in 70ml or 170ml Semco cartridges or standard 310ml sealant cartridges from which it can be directlyapplied using a suitable caulking gun.
- Forms Gel In
- Thixotropic paste
- Technology
- Composite Materials
- Packaging Type
- Drums
- Fillers Included
- Copper
- Material Features
- Electromagnetic Shielding (EMI)
- Good Aging Behavior
- High Temperature Resistance
- Handling
It is recommended that when not in use that the material is stored in a cool dark, dry place. If the facility exists then some form of refrigerated or freezer storage is ideal. If kept properly sealed and in a suitable location then the material will remain usable for up to 6weeks.When using this material observe usual standards of industrial hygiene/practice. Avoid skin/eye contact and work in a well-ventilated area.
- Composite Materials Functions
- Adhesive
- Surface Finish
- Plastics and Elastomers End Uses
- Electrical Parts
- Electronic Insulation
- Housings
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure time (approx. 4mm section) | 12 | hours |
| Density | 2.7 | g/cm³ |
| Hardness | 60 | Shore A |
| Volume Resistivity | max. 0.01 | Ω.cm |
| Adhesion | min. 100 | Ncm-2 |
| Attenuation – 100MHz to 10GHz (MIL-STD 285) | 80 - 115 | dB |
| Elongation | 100 | % |
| Service Temperature Range | -55 to 125 | °C |
