LUSTERCURE® LC 10-100 HI GLOSS CLEAR
LUSTERCURE® LC 10-100 HI GLOSS CLEAR is a medium viscosity, UV curable gloss coating designed to be applied via the screen printing method. When used as a protective hard coat the cured coating will provide a scuff and abrasion resistant high gloss finish. When a 10-14 micron deposit is applied a gloss level above 80 can be expected.
Properties
- Physical Form
- Liquid
Product families
- Protective Coatings
Other characteristics
- Brand
- LUSTERCURE
- Features
Excellent Scuff Resistance, Good Abrasion Resistance, High Gloss, Medium Viscosity
- Product Type
Radiation Curable Coating, Solventless & High Solids Coating; Radiation Curable Coating; Solventless & High Solids Coating
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
Plastics, Polycarbonate (PC), Polyesters, Polystyrene (PS), Polyvinyl Chloride (PVC)
- Odor
- Mild Acrylic
- Markets
- Paints & Coatings
- Coverage
Using 390 monofilament polyester mesh, Lustercure LC 10-100 will yield an average of 3200 square feet per gallon.
- Additives
To lower the viscosity which will enhance the transfer of the ink through the screen, use Thinner #1 (Diluent). To increase curing speeds add Activator #3 (Sensitizer). To eliminate bubbles resulting from the screening process, add Anti-Bubble #1 or #2. To eliminate "fish eyes" in the wet ink film add Flow Promoter.
- Appearance
- Slightly Hazy Clear Liquid
- Cure
- Radiation Cure
- Applications
Paints & Coatings — Other Paints & Coatings Applications
- Technology
- Ready-to-Use Products
- Special Notes
All UV inks and coatings are sensitive to contamination. Use only new screens or those previously used for UV printing. Do not add any conventional ink or solvents to the inks. They are most likely not compatible and will destroy all properties.
- Film Thickness
- Recommended 0.4 to 0.6 mil (10-15 microns).
- Application Methods
- Screen Coating
- Shelf Life (77°F)
- 6 months
- Storage and Handling
All KOLORCURE photopolymer inks and coatings should be stored in a cool dry area: 80°F (27°C) or below. Keep these inks and coatings away from direct sun light and indirect white light. Do not use these inks and coatings in areas having fluorescent lights overhead. Keep these inks and coatings away from internal heat sources.
- Recommended Substrates
LC 10-100 Hi Gloss Clear adheres well to Rigid PVC, Polycarbonate, Polyester, and Polystyrene.
- Curing
Lustercure LC 10-100 cures in air upon brief exposure to a focused high intensity ultraviolet light source. A standard 200-300 watt per inch medium pressure mercury vapor lamp should be used. For an optimal cure a 185-215 millijoule window is required. In addition faster curing speeds can also be achieved by adding 3-5% liquid sensitizer.
- Ready to Use Product Features
- Excellent Scuff Resistance
- Good Abrasion Resistance
- High Gloss
- Medium Viscosity
- Compatible Substrates and Surfaces
- Plastics
- Polycarbonate (PC)
- Polyesters
- Polystyrene (PS)
- Polyvinyl Chloride (PVC)
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 100.0 | % |
| Weight/U.S. Gallon | approx. 8.8 - 9.0 | lbs |
| Viscosity (25°C) | 950 - 1450 | cps |
| Flash Point | min. 200 (93) | °F (°C) |
