To catalogue
FluoroSLIP® 515
- CASE Ingredients Functions
- Anti-Abrasion AgentSlip Agent
FluoroSLIP® 515 is a combination of high melting synthetic wax and PTFE.
Product families
Applications
Printing & Packaging — Printing & Inks
- Gravure Printing
Product Families
CASE Ingredients — Additives
- Surface Modifiers
Other characteristics
- Brand
- FluoroSLIP
- End Uses
Lithographic Ink, Offset Ink, Powder Coating, Radiation Curable Ink, Solventborne Coating, Solventborne Ink, Waterborne Coating, Waterborne Ink
- Functions
- Anti-Abrasion Agent, Slip Agent
- Markets
- Printing & Packaging
- Use Levels
- 1 – 3%
- Cure
- Radiation Cure
- Coating Type
- Powder Coating
- Solventborne Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Ink and Toner Type
- Lithographic Ink
- Offset Ink
- Radiation Curable Ink
- Solventborne Ink
- Waterborne Ink
- Regulatory Status
The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180.
- HIGHLIGHTS
- Slip (Low COF)
- Rub Resistance
- Abrasion Resistance
- Mar/Scuff
- Gloss Clarity
- Block Resistance
- Known For
FluoroSLIP® 515 can be used in both the ink and coating industry. FluoroSLIP® 515 is recommended for offset inks and water-based, solvent-based and UV systems at 1 – 3% of the total formulation weight. It is also widely used in powder coatings.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Hegman Grind | min. 5.5 | — |
| Melting Point (Synthetic Wax) | 248 / 120 | ˚F / ˚C |
| NPIRI Grind | max. 4 | — |
| Particle Size Mean Value | 8.0 | μm |
| Particle Size Under (at 99%) | 30.0 | μm |
| Specific Gravity | 1.1 | g/cm³ |
