Shamrock Technologies Inc. S-394-N1
- CASE Ingredients Functions
- Anti-Abrasion Agent
S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes
Identification
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Aerospace Coatings
- Automotive OEM Coatings
- Off Road & Commercial Vehicle Coatings
- Other Automotive & Transportation Coatings
- Rail & Mass Transit Coatings
- Other Industrial Applications
- Aerospace Coatings
- Automotive OEM Coatings
- Off Road & Commercial Vehicle Coatings
- Other Coatings & Finishes
- Rail & Mass Transit Coatings
- Agricultural & Construction Equipment
- Appliances & Consumer Goods
- Industrial Coatings
- Metal Coatings
- Textile Manufacturing
- Digital Printing
- Electrophotography & Electrostatic Printing
- Flexography
- Gravure Printing
- Inkjet Printing
- Letterpress
- Offset & Lithographic Printing
- Screen Printing
- Aerospace & Aviation
- Commercial
- Rail & Mass Transit
Product Families
- Surface Modifiers
Other characteristics
- End Uses
Clearcoat, Powder Coating, Radiation Curable Coating, Solventborne Coating, Waterborne Coating
- Functions
- Anti-Abrasion Agent
- Markets
- Automotive & Transportation
- Consumer Goods
- Industrial
- Paints & Coatings
- Printing & Packaging
- Use Levels
- 2 - 3%
- Cure
- Radiation Cure
- Coating Type
- Clearcoat
- Powder Coating
- Radiation Curable Coating
- Solventborne Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Regulatory Status
The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 175.320, 176.170, and 176.180.
- HIGHLIGHTS
- Good Abrasion Resistance
- Good Slip
- Assists in Matting
- Compatible Substrates and Surfaces
- Metal
- Known For
S-394-N1 is recommended for liquid and paste inks. S-394-N1 is also recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. S-394-N1 can be used for both pigmented and clear compositions. S-394-N1 is recommended at 2-3% of total formula weight for slip and abrasion resistance and 5-10% for matting.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Hegman Grind | min. 6.5 | — |
| Melting Point | 230 / 110 | ˚F / ˚C |
| NPIRI Grind | max. 2 | — |
| Particle Size Mean Value | 6.0 | μm |
| Particle Size Under (at 99%) | 12.0 | μm |
| Specific Gravity | 0.95 | g/cm³ |
