To catalogue
FluoroSLIP® 731 MG
- CASE Ingredients Functions
- Anti-Abrasion AgentSlip Agent
FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.
Product families
Applications
Printing & Packaging — Packaging Coatings
- Primers & Lacquers
Paints & Coatings — Packaging Coatings
- Primers & Lacquers
Product Families
CASE Ingredients — Additives
- Surface Modifiers
Other characteristics
- Brand
- FluoroSLIP
- End Uses
Radiation Curable Ink, Solventborne Ink, Waterborne Ink
- Functions
- Anti-Abrasion Agent, Slip Agent
- Markets
- Paints & Coatings
- Printing & Packaging
- Use Levels
- 1 - 2%
- Cure
- Radiation Cure
- Technology
- CASE Ingredients
- Ink and Toner Type
- Radiation Curable Ink
- Solventborne Ink
- Waterborne Ink
- Regulatory Status
The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180.
- HIGHLIGHTS
- Slip (Low COF)
- Rub Resistance
- Abrasion Resistance
- Mar/Scuff
- Gloss Clarity
- Release Properties Block Resistance
- Known For
FluoroSLIP® 731 MG is recommended for thin film water-based, solvent-based and UV systems at 1- 2% of the total formula weight. It is especially recommended for can coatings.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Hegman Grind | min. 6.5 | — |
| Melting Point (Synthetic Wax) | 232 / 111 | ˚F / ˚C |
| NPIRI Grind | max. 2 | — |
| Particle Size Mean Value | 5.0 | μm |
| Particle Size Under (at 99%) | 12.0 | μm |
| Specific Gravity | 1.1 | g/cm³ |
