ASTC 1006 Polyurea Spray
- Chemical Family
- Mixtures & Blends, Polyureas
ASTC 1006 Polyurea Spray is a two component, high wet-out, long open time, aromatic MDI or TDI prepolymer and multifunctional polyurea amine blend. The polymer system is "pure polyurea" and is not modified using urethane or other additives.
Other characteristics
- Features
Abrasion Resistant, Chemical Resistant, Flexible, Good Bonding Strength, High Hydrolytic Stability, High Tensile Strength, Impact Resistance, Skid Resistant
- Product Type
2K (2 component) Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Solventless & High Solids Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Composites, Concrete, Metal, Wood
- Color
Black, Medium Gray, Kaki Tan. Note: Aromatic systems will shift color from exposure to UV. Dark colors resists color change more than light colors.
- Prime
Prime when needed with ASTC primer Penprime 7001. Prime 1 to 2 hours prior to the 1006 application for best results. Avoid heavy mil thickness of primer, maintain mil profile with primer. Steel; prime immediately after cleaning to avoid flash rusting.
- Markets
- Automotive & Transportation
- Building & Construction
- Paints & Coatings
- PACKAGING
- 110 gallon kits
- Advantages
Slowed" set times-6 to 8 minutes; Excellent bond development &better "Wet-out" contact time; Designed to chemically bond to astc primers; Excellent with reinforcing fabrics; Protects concrete and other surfaces, wood, metal, etc.; Chemical resistant, high impact& abrasion; Resistance, tack free in6-9 minutes; 100% solids, no voc problems, no odor; Marine environmentss; Secondary containment with non-skid; Corrosive barrier, protective coating protection; Processing equipment; Concrete tanks & steel tanks; Secondary containment walls and floors; All industrial service surfaces; Roofing systems; Geotextile containment treatment; Water features
- Limitations
Do not use on wet surfaces or expose part A to moisture. Keep out of direct sunlight, store drum kits on wood pallets at room temperature. Always mix the part B before using. Pre-heat drums as needed per environmental temperature. Best results over vapor barrier and/or compatible primer. Protect from cold during storage and shipping.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
20 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids | 100.0 | % | — |
| Hardness | 60 to70 | Shore D | ASTM D2240 |
| Mix Ratio | 1:1 | — | — |
| Tack Free | 2022-06-09 | minutes | ASTM D2471 |
| Tensile | 2700.0 | — | ASTM D412 |
| Tear Strength | 400-600 | psi | pli ASTM 624-C |
| Gel Time (75°F) | 65.0 | Seconds | — |
| Set Time | 2022-06-08 | minutes | — |
| Elongation | 330 - 350 | % | ASTM D124 |
| Processing Temperature | 160 - 170 | °F | — |
| Viscosity ( 75°F cps, A ) | 800-1200 | — | — |
| Viscosity (75°F cps, B) | 600-900 | — | — |
