MECOSTAT® 3/2791

Other characteristics

Brand

MECOSTAT

End Uses

Food Packaging, Thermoforming Applications

Functions

Anti-Fogging Agent

Labeling Claims

Biodegradable, Environmentally Friendly, Food Contact Acceptable; Biodegradable; Environmentally Friendly; Food Contact Acceptable

Compatible Polymers & Resins

Acrylonitrile Butadiene Styrene (ABS), High-Density Polyethylene (HDPE), Low-Density Polyethylene (LDPE), Poly(Methyl Methacrylate) (PMMA), Polycarbonates (PC), Polyethylene Terephthalate Glycol (PETG), Polypropylenes (PP), Polystyrenes (PS), Polytetrafluoroethylene (PTFE), Polyurethanes (PU), Polyvinyl Chloride (PVC)

Safety

MECOSTAT-3/2791 as well as the raw materials contained in it comply with the appropriate EC-Directives and with the US FDA food additive regulations. MECOSTAT-3/2791 is environment-friendly and easily biodegradable.

Markets

Printing & Packaging

Technology

Plastics

Material Features

• Food Contact Acceptable
• Friction Reduction

Processing Directions

the following processes are suitable for coating: immersion bath, felting, roller application, application by flexographic or gravure printing, spray coating, rotor spraying coating (the appropriate processes are dependent on the application purpose); coating quantity: 1 to 4 g per sqm (wet coating amount); the coated surface must be completely dry before further processing or winding the foil (if required, drying with warm air); If MECOSTAT-3/2791 is applied on warm plastic surfaces, the surface temperature should not exceed 80 °C; MECOSTAT-3/2791 is supplied as a ready for use solution; machine parts which come into contact with MECOSTAT-3/2791 should be made of corrosion proof materials; a combination of MECOSTAT-3/2791 with antistatic additives is not recommended because of possible reactions; depending on the particular application corona pretreatment is recommended (on Polyolefines and Polystyrene); due to the large number of applications and processing procedures we would like to point out that corresponding tests have to be performed by the customer to make sure that there will be no incompatibility with the raw materials, additives and the processing procedures

Show in full

Mode of Antifog Operation

Antifogging performance hinges on two chemical capabilities: sheeting and hydrophilicity, (the compatibility of the molecules with water).; Water ordinarily condenses on a surface as tiny droplets, which refract light in such a way that you cannot easily see through the surface. If the surface is treated with an antifogging agent, you get a vastly different picture.; The antifogging agent molecules are hydrophiles, so they dissolve in the water droplets. And as they do, they lower the surface tension of the droplets. Droplets spread on the surface and form a continuous film. This film refracts light the same way as a dry surface with the result of a clear visibility

Show in full

Certifications and Compliance

FDA Compliant

Compatible Polymers and Resins

• Acrylonitrile Butadiene Styrene (ABS)
• High-Density Polyethylene (HDPE)
• Low-Density Polyethylene (LDPE)
• Poly(Methyl Methacrylate) (PMMA)
• Polycarbonates (PC)
• Polyethylene Terephthalate Glycol (PETG)
• Polypropylenes (PP)
• Polystyrenes (PS)
• 3 more

Plastics and Elastomers End Uses

• Food Packaging
• Thermoforming Applications

Plastics and Elastomers Functions

Anti-Fogging Agent