MECOSTAT® 3/272
MECOSTAT-3/272 surface antistatic agent is a highly effective liquid coating material forthe antistatic finishing of plastic surfaces as well as for improving slip properties.Fabrics coated with MECOSTAT-3/272 comply with the certificate class D for antistatic bags.
Properties
- Physical Form
- Liquid
Product families
- Performance Additives
- Surface Modifiers
Other characteristics
- Brand
- MECOSTAT
- End Uses
- Food Packaging, Thermoforming Applications
- Functions
- Anti-Static Agent, Slip Agent
- Labeling Claims
- Biodegradable, Environmentally Friendly
- Biodegradable
- Environmentally Friendly
- Processing Methods
- Coating, Thermoforming
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), High-Density Polyethylene (HDPE), Low-Density Polyethylene (LDPE), Poly(Methyl Methacrylate) (PMMA), Polycarbonates (PC), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol (PETG), Polypropylenes (PP), Polystyrenes (PS), Polytetrafluoroethylene (PTFE), Polyurethanes (PU), Polyvinyl Chloride (PVC)
- Markets
- Electrical & Electronics
- Paints & Coatings
- Printing & Packaging
- Shelf LIfe
The shelf life from delivery date is at least 1 year under normal storage conditions in sealed cans.
- Technology
- Plastics
- Material Features
- Friction Reduction
- Temperature Resistance
- Application Areas
- mono and multifilaments
- woven plastics
- class D certified antistatic bags
- thermoforming sheets > 1000 µm
- Processing Directions
the following processes are suitable for coating: immersion bath, felt application, roll coating and application by flexographic or gravure printing, spray coating, rotor spraying coating (the appropriate procedures depend on the purpose of application).; If MECOSTAT-3/272 is applied on warm plastic surfaces, the surface temperature should not exceed 80 °C; coating quantity: according to the purpose of application between 4 and 8 g per sqm (wet coating amount); the coated surface must be completely dry before further processing or coiling the film or fabric (if required, drying with warm air); MECOSTAT-3/272 is supplied as a ready for use solution, the product must not be diluted. Dilution will have a negative effect on the antistatic properties, first of all on the long term; antistatic properties and on the adhesion of the antistatic agent to the plastic surface; machine parts which come into contact with MECOSTAT-3/272 should be made of corrosion proof materials but not from copper, aluminum and their alloys; a combination of MECOSTAT-3/272 with antistatic additives is not recommended because of possible reactions; depending on the application, a corona pretreatment is recommended (e.g. on polyolefines and polystyrene); due to the large number of applications and processing procedures we would like to point out that corresponding tests have to be performed by the customer to make sure that there will be no incompatibility with the raw materials, additives and the processing procedures; the material has to be used undiluted
- Environmental Compatibility
MECOSTAT-3/272 is environment-friendly and easily biodegradable.
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- High-Density Polyethylene (HDPE)
- Low-Density Polyethylene (LDPE)
- Poly(Methyl Methacrylate) (PMMA)
- Polycarbonates (PC)
- Polyethylene Terephthalate (PET)
- Polyethylene Terephthalate Glycol (PETG)
- Polypropylenes (PP)
- Plastics and Elastomers End Uses
- Food Packaging
- Thermoforming Applications
- Plastics and Elastomers Functions
- Anti-Static Agent
- Slip Agent
