To catalogue
MARFRAN® E CDP 65A
MARFRAN® E CDP 65A is a TPE-S compound based on SEBS modified with specific intrinsically conductive polymers in order to obtain a material with high capability to discharge the electrostatic charges. The electrical conduction mechanism based on Intrinsically Conductive Polymer ensures that this capability is permanent, regardless of the conditions of use of the product. The MARFRAN® E CDP also guarantees a good level of physical and mechanical characteristics.
Product families
Elastomers — Thermoplastic Elastomers
- Styrenic Thermoplastic Elastomers (TPE-S)
Other characteristics
- Brand
- MARFRAN
- Polymer Name
- Styrene Ethylene Butylene Styrene (SEBS)
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Applications
- Consumer Goods — Footwear
- Technology
- Elastomers
- Labeling Claims
- Food Contact Acceptable
- Processing Tips
- Injection machine with standard three-zone screw for polyolefins.
- Injection pressure-speed
- medium/high.
- Injection channels
- with rounded and regular section; avoid sharp edges.
- Material Features
- Easier Processing
- Enhanced Physical Properties
- Food Contact Acceptable
- Good Mechanical Properties
- Light Weight
- Static-Dissipative
- Certifications and Compliance
- ISO 13485
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Footwear
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 50.0 | Shore A |
| Food Contact Grade | Yes | — |
| Density | 940.0 | g/cm³ |
| Tensile Strength | 3.7 | MPa |
| Elongation at Break | 500.0 | % |
| Tear Strength | 29.0 | N/m |
| Volume Resistivity | max. 1E9 | ohms-cm |
| Surface Resistivity | max. 1E9 | Ohm/sq |
| Temperature Profile of the Cylinder | 190 ÷ 220 | °C |
| Maximum Processing Temperature | 240.0 | °C |
| Mold Temperature | 20 ÷ 30 | °C |
| Pre-drying (80°C for 4 h) | Mandatory | — |
