To catalogue
MARFRAN® E CDT2 50A
MARFRAN® E CDT2 50A is a TPE-S compound based on SEBS with mineral filler and antistatic migrant additives in order to obtain an appreciable anti-static effect that decreases over time offering a high performance/price ratio.
Product families
Elastomers — Thermoplastic Elastomers
- Styrenic Thermoplastic Elastomers (TPE-S)
Other characteristics
- Brand
- MARFRAN
- Polymer Name
- Styrene Ethylene Butylene Styrene (SEBS)
- Additives Included
- Anti-Static Agent
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Applications
- Consumer Goods — Footwear
- Technology
- Elastomers
- Fillers Included
- Mineral
- Material Features
- Cost Effective
- Easier Processing
- High Performance
- Light Weight
- Static-Dissipative
- Certifications and Compliance
- ISO 13485
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Footwear
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 50.0 | Shore A |
| Food Contact Grade | No | — |
| Density | 1000.0 | g/cm³ |
| Tensile Strength | n.a. | MPa |
| Elongation at Break | n.a. | % |
| Tear Strength | n.a. | N/m |
| Volume Resistivity | max. 30E12 | ohms-cm |
| Surface Resistivity | max. 10E12 | Ohm/sq |
| Temperature Profile of the Cylinder | 170 ÷ 200 | °C |
| Maximum Processing Temperature | 230.0 | °C |
| Mold Temperature | 20 ÷ 30 | °C |
| Pre-drying | Not Necessary | — |
