POLYCAT® SA 2 LE
- CASE Ingredients Features
- Improved Ageing Resistance
- Chemical Family
- Amines, Tertiary AminesAminesTertiary Amines
POLYCAT® SA 2 LE is a low-emissive, delayed-action tertiary amine based on DBU. It effectively enhances the urethane reaction when heat is applied, making it suitable for microcellular, integral skin, coating, adhesive, sealant, and elastomer applications. This product is especially recommended for use with low-activity aliphatic isocyanates.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Catalyst
Product families
Applications
- Consumer Goods — Luggage & Leather Goods
- Batteries
Product Families
- Catalysts & Initiators
- Initiators Promotors & Catalysts
- RTU Catalysts
- Catalysts Initiators & Crosslinkers
Other characteristics
- Brand
- POLYCAT
- Functions
- Catalyst
- Markets
- Consumer Goods
- Electrical & Electronics
- Appearance
- Light yellow liquid
- Soluble In
- Water
- Technology
- CASE Ingredients
- Composite Materials
- Elastomers
- Industrial Additives & Materials
- Material Features
- Fast Curing
- Long Potlife
- Low Emissions
- Storage Condition
- Storage conditions
- dry and cool place in factory-packed containers.
- Optimum storage temperature
- 10 to 30 °C.
- Applicable Processes
- Artificial Leather Manufacturing
- Batteries Manufacturing
- Flexible Foam Manufacturing
- Rigid Foam Manufacturing
- Applications
POLYCAT® SA 2 LE is recommended for low emissions flexible, rigid and castable polyurethane formulations for coatings, adhesives, composites, and elastomers. POLYCAT® SA 2 LE exhibits formulation latitude allowing for a broad use level range to achieve desired processing and reactivity requirements.
- Key Performance Benefits
Low emission catalyst; Long pot life and fast back-end cure; Broad use of level range to meet desired reactivity requirements
- Compatible Polymers and Resins
- Polyurethanes (PU)
- Industrial Additives End Use
- Batteries
- Polyurethane Foams
- Composite Materials Functions
- Catalyst
- Industrial Additives Functions
- Catalyst
- Plastics and Elastomers End Uses
- EV Battery Management System
- EV Battery Pads
- Synthetic Leather
- Plastics and Elastomers Functions
- Catalyst
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (at 25°C) | 2600.0 | mPa.s | — |
| Density (at 25°C) | 1.13 | g/cm³ | — |
| Calculated OH number | 168.0 | mg KOH/g | — |
| Flash Point | min. 93 | °C | PMCC |
