To catalogue
XECARB® ST 1-C30
- Chemical Family
- Polyamides
XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Footwear
- Consumer Goods — Sports & Recreation
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- XECARB® ST
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Carbon Fiber
- Processing Methods
- Injection Molding
- Reinforcement Material
- Carbon Fibers
- Markets
- Automotive & Transportation
- Consumer Goods
- Technology
- Composite Materials
- Plastics
- Composites End Use
- Structural Parts
- Material Features
- Broad Processing Window
- Electrically Conductive
- Excellent Mechanical Strength
- Excellent Toughness
- Good Impact Strength
- Good Mechanical Properties
- Good Processability
- Light Weight
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Drones
- Industrial Applications
- Mountaineering Boots
- Structural Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dam) | 1.2 | g/cm3 | ISO 1183 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 1 mm/min, Dam) | 20000.0 | MPa | ISO 527 |
| Tensile Strength (at Break, 5 mm/min, Dam) | 215.0 | MPa | ISO 527 |
| Tensile Elongation (at Break, 5 mm/min, Dam) | 4.0 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min, Dam) | 15800.0 | MPa | ISO 178 |
| Flexural Stress (at 3.5% Strain, 2 mm/min, Dam) | 295.0 | MPa | ISO 178 |
| Notched Izod Impact Strength (at 23°C, 50% RH, Dam) | 24.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at 23°C, 50% RH, Dam) | 80.0 | kJ/m2 | ISO 180 |
| Notched Izod Impact Strength (at -30°C, Dam) | 16.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at -30°C, Dam) | 74.0 | kJ/m2 | ISO 180 |
Table 3 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Drying Temperature | 80 - 100 | °C | Desiccant Dryer |
| Drying Time | 6 - 8 | hrs | Desiccant Dryer |
| Melt Temperature | 265 - 280 | °C | — |
| Mould Temperature | 95.0 | °C | — |
