To catalogue
XECARB® 30-C30
- Chemical Family
- Polyamides
XECARB® 30-C30 is a 30% carbon fiber reinforced PA6.10
Product families
Applications
Applications
- Consumer Goods — Footwear
Building & Construction — Building Materials
- Structural Components
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- XECARB
- Polymer Name
- Polyamide 610 (PA 610)
- Fillers Included
- Carbon Fiber
- Processing Methods
- Injection Molding
- Reinforcement Material
- Carbon Fibers
- Markets
- Building & Construction
- Consumer Goods
- Technology
- Composite Materials
- Plastics
- Composites End Use
- Structural Parts
- Material Features
- Electrically Conductive
- Good Mechanical Properties
- Good Processability
- Low Density
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Plastics and Elastomers End Uses
- Mountaineering Boots
- Structural Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dam) | 1.21 | g/cm3 | ISO 1183 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 1 mm/min, Dam) | 20300.0 | MPa | ISO 527 |
| Tensile Strength (at Break, 5 mm/min, Dam) | 230.0 | MPa | ISO 527 |
| Tensile Elongation (at Break, 5 mm/min, Dam) | 4.1 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min, Dam) | 15300.0 | MPa | ISO 178 |
| Flexural Stress (at 3.5% Strain, 2 mm/min, Dam) | 310.0 | MPa | ISO 178 |
| Notched Izod Impact Strength (at 23°C, 50% RH, Dam) | 18.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at 23°C, 50% RH, Dam) | 88.0 | kJ/m2 | ISO 180 |
| Notched Izod Impact Strength (at -30°C, Dam) | 14.0 | kJ/m2 | ISO 180 |
| Unnotched Izod Impact Strength (at -30°C, Dam) | 92.0 | kJ/m2 | ISO 180 |
Table 3 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Drying Temperature | 80 - 100 | °C | Desiccant Dryer |
| Drying Time | 6 - 8 | hrs | Desiccant Dryer |
| Melt Temperature | 260 - 275 | °C | — |
| Mould Temperature | 90.0 | °C | — |
