VESTAMID® DX9303 BK E70288
- Chemical Family
- Polyamides
VESTAMID® DX9303 BK E70288 is a PA 612 extrusion compound developed for tubing systems with higher heat resistance requirements. Its melting point is approximately 35°C higher than that of PA 11 and PA 12 compounds, allowing for higher peak temperatures during use. This compound meets the increased demands resulting from higher temperatures in the engine compartment.
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Fuel Systems
Product Families
- Polyamides
Other characteristics
- Brand
- VESTAMID
- Polymer Name
- Polyamide 612 (PA 612)
- Flexural Modulus
- 847.47 MPa
- Additives Included
Heat Stabilizer, Impact Modifier, Light Stabilizer, Plasticizer (Unspecified); Heat Stabilizer; Impact Modifier; Light Stabilizer; Plasticizer (Unspecified)
- Color (Properties)
- Black
- Materials Features
Dimensional Stability, Electrically Insulating, Fuel Resistant, Good Impact Strength, Good Light Stability, Good Thermal Stability, Good Weather Stability, Heat Resistance, Heat Stabilized, High Viscosity, Impact Modified, Impact Resistance, Light Stabilized, Low Moisture Absorption, Oil Resistant, Plasticized, UV Resistant, Unreinforced, Very Good Heat Resistance
- Processing Methods
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion
- Markets
- Automotive & Transportation
- Shelf LIfe
- 2 years
- Flame Rating
- IEC 60695-11-10 HB
- Technology
- Plastics
- Color
- Black
- Material Features
- Dimensional Stability
- Electrically Insulating
- Fuel Resistant
- Good Impact Strength
- Good Light Stability
- Good Thermal Stability
- Good Weather Stability
- Heat Resistance
- Attributes
The melting point of VESTAMID® DX9303 BK E70288 is about 35°C higher than PA 11 and PA 12 compounds, allows higher peak temperatures in use. Thereby this compound fulfills the increased demands resulting from higher temperatures in the engine compartment.; If it is intended to use VESTAMID® DX9303 BK E70288 for fuel lines, certain preconditions must be observed. The Technical Marketing assists you in finding the suitable VESTAMID® compound. At temperatures above 100°C tubing of VESTAMID® DX9303 BK E70288 allow a higher pressure load than tubing made of PA 12 compounds with comparable flexibility.; The process temperatures should be in the range of 240-270°C.; The material absorbs only little moisture. Therefore dimensions and properties of parts are nearly unaffected through ambient conditions. Pigmentation may affect values.
- Storage Condition
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Fuel Lines
- Engine Systems
- Hoses
- Tubes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
- Pipe Extrusion
- Tubing Extrusion
Technical data
Table 1 of 8
23 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (dry) | 131000 | psi | ISO 527 |
| Tensile Modulus (cond.) | 98600 | psi | ISO 527 |
| Tensile Strength (dry) | 5510 | psi | ISO 527 |
| Yield Stress (dry) | 5510 | psi | ISO 527 |
| Yield Strain (dry) | 30 | % | ISO 527 |
| Stress at 50% Strain (dry) | 5370 | psi | ISO 527 |
| Stress at Break (dry) | 6530 | psi | ISO 527 |
| Stress at Break (cond.) | 5950 | psi | ISO 527 |
| Nominal Strain at Break (ɛtb, dry) | 196 | % | ISO 527 |
| Nominal Strain at Break (ɛtb, cond.) | 200 | % | ISO 527 |
| Typical for the Mat. Nom. Strain at Break (ɛtb) | 2200 | % | ISO 527 |
| Charpy Notched Impact Strength (+23°C, dry) | 41.4 | ftlb/in² | ISO 179/1eA |
Table 2 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (dry) | 1.05 | g/cm³ | ISO 1183 |
| Water Absorption (dry) | 2.4 | % | Sim. to 1SO 62 |
| Humidity Absorption (dry) | 1 | % | Sim. to 1SO 62 |
| Shore D Hardness (dry) | 70 (3 sec) | — | ISO 7619-1 |
| Shore D Hardness (cond.) | 65 (3 sec) | — | ISO 7619-1 |
Table 3 of 8
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (dry) | 412 | °F | ISO 11357-1/-3 |
| Glass Transition Temperature (dry) | 68 | °F | ISO 11357-1/-2 |
| Temperature of Deflection Under Load A (1.80 Mpa, dry) | 140 | °F | ISO 75-1/-2 |
| Temperature of Deflection Under Load B (0.45 Mpa, dry) | 288 | °F | ISO 75-1/-2 |
| Vicat Softening Temperature A (10 N, 50 K/h, dry) | 396 | °F | ISO 306 |
| Vicat Softening Temperature B (50 N, 50 K/h, dry) | 318 | °F | ISO 306 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Parallel, dry) | 8.33e-05 | in/in/°F | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Normal, dry) | 6.67e-05 | in/in/°F | ISO 11359-1/-2 |
Table 4 of 8
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity (pV, dry) | 2E10 | Ohm*m | IEC 62631-3-1 |
| Volume Resistivity (pV, cond.) | 5.3E8 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity (σC, Circular Electrodes, dry) | 2.6E12 | Ohm/sq | IEC 62631-3-2 |
| Surface Resistivity (σC, Circular Electrodes, cond.) | 5E12 | Ohm/sq | IEC 62631-3-2 |
| Relative Permittivity (50Hz, dry) | 5 | — | IEC 62631-2-1 |
| Relative Permittivity (100Hz, dry) | 4.7 | — | IEC 62631-2-1 |
| Relative Permittivity (1MHz, dry) | 27 | — | IEC 62631-2-1 |
| Dissipation Factor (50Hz, dry) | 1700 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (100Hz, dry) | 1450 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1Mhz, dry) | 400 | E-4 | IEC 62631-2-1 |
| Electric Strength (AC, S20/S20, t. 1 mm, dry.) | 991 | kV/in | IEC 60243-1 |
| Electric Strength (AC, S20/S20, t. 1 mm, cond.) | 864 | kV/in | IEC 60243-1 |
Table 5 of 8
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Injection Molding - Melt Temperature | 482 | °F | ISO 294 |
| Injection Molding - Mold Temperature | 176 | °F | ISO 294 |
| Injection Molding - Injection Velocity | 7.87 | in/s | ISO 294 |
Table 6 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume Flow Rate (dry, at 527°F, 1lb)) | 1 | cm³/10min | ISO 1133 |
| Molding Shrinkage (Parallel, dry) | 2.7 | % | ISO 294-4, 2577 |
| Molding Shrinkage (Normal, dry) | 9 | % | ISO 294-4, 2577 |
| Mold Temperature (dry) | 176 | °F | — |
| Melt Temperature (dry) | 482 | °F | — |
Table 7 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cold Impact Resistance (Breaks of 10, -40°C, 912g, Tube Dimension: 8x1 mm) | 0 | — | SAE J2260, J2043 |
| Cold Impact Resistance (Breaks of 10, -40°C, 454g, Tube Dimension: 8x1 mm) | 0 | — | SAE J844 |
| Cold Impact Resistance (Breaks of 10, -40°C, 454g, Tube Dimension: 8x1 mm, Pretreatment: 2h Boiling, Water) | 0 | — | SAE J844 |
| Cold Impact Resistance (Breaks of 10, -40°C, 454g, Tube Dimension: 8x1 mm, Pretreatment: 24h, 110°C) | 0 | — | SAE J844 |
| Burst Hoop Stress (23°C, H₂O, dry) | 4930 | psi | DIN 53758, historical |
Table 8 of 8
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | HB | class | IEC 60695-11-10 |
| Burning Behavior (at Thickness 0.1260 in.) (dry) | HB | class | IEC 60695-11-10 |
