To catalogue
AEROXIDE® Alu C 805
- CAS Number
- 112926-00-8
- EC Number
- 601-214-2
- Chemical Name
- Silica gel pptd. cryst.-free
- Chemical Family
- Aluminum Compounds, SilicatesAluminum CompoundsSilicates
AEROXIDE® Alu C 805 is a fine-particulate, fumed aluminum oxide (Al₂O₃) that is highly hydrophobized with an organosilane.
Product families
CASE Ingredients — Additives
- Functional Additives
Plastics — Polymer Additives
- Other Plastic Additives
- Processing Aids
- Rheology Modifiers
Other characteristics
- Brand
- AEROXIDE
- Features
- Free Flowing, Hydrophobic
- Functions
- Anti-Caking Agent, Processing Aid
- Processing Methods
- 3D Printing
- Compatible Polymers & Resins
- Polyvinyl Chloride (PVC)
- Note
- * ex plant
- Shelf LIfe
- 2 years
- Applications
In polymers to control dielectric properties and corona resistance; In plastic powders (such as PVC) to prevent agglomeration and to protect the powder from moisture.; Typical Applications; Plasticizers; Blowing agents; Antistatic agents; Anti-fogging agents
- Technology
- CASE Ingredients
- Plastics
- Packaging Type
- Bags
- Product Features
- High specific surface area (BET)
- High chemical purity
- Hydrophobic surface
- Material Features
- Free Flowing
- Hydrophobic
- Storage Condition
Recommend to store the product in closed containers under dry conditions and to protect the material from volatile substances. AEROXIDE® Alu C 805 should be used within 2 years after production.
- Chemical Inventories
- DSL (Canada)
- EEC/EU
- TSCA (USA)
- Country Availability
- Canada
- Mexico
- USA
- Packaging Information
AEROXIDE® Alu C 805 is supplied in multiple layer 10 kg paper bags.
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Polyvinyl Chloride (PVC)
- Plastics and Elastomers End Uses
- 3D Printing Applications
- Cables
- Electrical Insulation
- Electronic Insulation
- Plastics and Elastomers Functions
- Anti-Caking Agent
- Processing Aid
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Tamped Density* | approx. 50 | g/l |
| Specific Surface Area (BET) | 75 - 105 | m²/g |
| pH Value (in 4% dispersion) | 3.0 - 4.5 | — |
| Loss on Drying* (at 105 °C, 2 hours) | max. 2.0 | % |
| Carbon Content | 3.5 - 4.5 | % |
| Al₂O₃ Content (based on ignited material) | min. 95 | % |
