SIPERNAT® 2200 PC
- INCI Name
- Hydrated Silica
SIPERNAT® 2200 PC is an eco-friendly solution. As a micro-granular silica with spherical particles in the range of 320 µm and low fine content, it is used to replace polyethylene beads in exfoliating skincare formulations such as shower gels and body cleansers. In addition to its scrubbing effect, its sponge-like structure can also transport liquid ingredients into the cosmetic formulation. Its microbiological quality is guaranteed through regular and stringent monitoring.
Properties
- Physical Form
- Granules
- Powder
- Solid
Product families
Applications
- Bath & Shower
- Skin Care
Product Families
- Solvents & Carriers
- Texturizers & Fillers
Other characteristics
- Brand
- SIPERNAT
- Functions
- Carrier, Exfoliant (Physical)
- Benefit Claims
Cleaning, Cleansing, Exfoliating, Rapid Absorption, Suitable for Sensitive Skin; Cleaning; Cleansing; Exfoliating; Rapid Absorption; Suitable for Sensitive Skin
- Labeling Claims
Clean at Sephora, Credo Clean Standard, Environmentally Friendly, Odor-free, Ulta Beauty's Conscious Beauty; Clean at Sephora; Credo Clean Standard; Environmentally Friendly; Odor-free; Ulta Beauty's Conscious Beauty
- Certifications & Compliance
COSMOS, FAMI-QS, Hazard Analysis Critical Control Point (HACCP), ISO 16128, NaTrue, REACH (Europe)
- Note
1) based on original substance 2) based on ignited substance (2 h / 1000°C) 3) According to COLIPA - Guidelines on Microbial Quality Management (MQM, Chapter 7.2.1 - Quantitative Specification, the above listed limit shall be interpreted as follows: 10* --> the maximum limit of acceptance is 5 x 10) *) The given data are typical values. Specifications on request.
- Odor
- Odorless
- Markets
- Personal Care
- Appearance
- White powder
- Shelf LIfe
- 24 months
- Technology
- Cosmetic Ingredients
- Application Format
- Creams
- Gel
- Rinse Off
- Storage Condition
Our silica products are inert and extremely stable chemically. However, due to their high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere. Therefore, we recommend storing the products in sealed containers in a dry, cool place, and removed from volatile organic substances. Even if a product is stored under these conditions, after a longer period it can still pick up ambient moisture over time, which could lead to its exceeding the specified moisture content. For this reason, our recommended use-by date is 24 months after date of manufacture. Product more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ENCS (Japan)
- IECSC (China)
- KECI (Korea)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- TSCA (USA)
- Skin Care Applications
- Facial Cleanser
- Skin Cleanser
- Bath & Shower Applications
- Body Wash
- Scrub
- Shower Gels
- Certifications and Compliance
- COSMOS
- FAMI-QS
- Hazard Analysis Critical Control Point (HACCP)
- ISO 16128
- NaTrue
- REACH (Europe)
- Cosmetic Ingredients Functions
- Carrier
- Exfoliant (Physical)
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Yeasts and moulds³ | pass | cfu/g | acc to Ph. sur |
| Total Plate Count³ | max. 100 | cfu/g | acc to Ph. sur |
| Sulfate Content¹ | max. 300 | % | ISO 15350 |
| Iron Content¹ | max. 1.5 | ppm | Internal Method |
| Sodium Content¹ | max. 400 | % | Internal Method |
| SiO₂ Content³ | max. 1.0 | % | ISO 3262-19 |
| Standard Value (γ) | min. 97 | — | DIN 33763 |
| Tamped Density (Not Sieved) | 250 | g/l | ISO 787-11 |
| Sieve Residue (250µm, Alpine) | 75 | % | ISO 8130-1 |
| pH Value (5% in water) | 6 | — | ISO 787-9 |
| Loss on Drying (2h at 105°C) | max. 7.0 | % | ISO 787-2 |
| Particle Size (d50 Laser Diffraction) | 320 | µm | ISO 13320-1 |
