To catalogue
Tuftec™ H1052
- CASE Ingredients Features
- Excellent AdhesionGood Mechanical PropertiesHeat ResistanceImproved Flexibility
- Chemical Family
- Styrenics
Asahi Kasei Tuftec™ H1052 shows moderate adhesion and is good for adhesive layer of protective films by multi-layer extruding process or easy peel films. It is also used as an impact modifier of polypropylene (PP). Its excellent stretch property provides stretch films such as food wrapping film.
Properties
- Physical Form
- Pellets
- Solid
Identification
- CASE Ingredients Functions
- Impact ModifierPlasticizer
Product families
Applications
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
Adhesives & Sealants — Building & Construction
- Sealants & Caulks
Building & Construction — Building Materials
- Sealants & Caulks
Adhesives & Sealants — Packaging & Paper
- Tape & Label Adhesives
Printing & Packaging — Tapes, Labels & Adhesives
- Tapes & Labels
Product Families
CASE Ingredients — Additives
- Functional Additives
Other characteristics
- Brand
- Tuftec
- End Uses
- Hot Melt Adhesive
- Features
Excellent Adhesion, Good Mechanical Properties, Heat Resistance, Improved Flexibility
- Functions
- Impact Modifier, Plasticizer
- Compatible Polymers & Resins
- Polypropylenes (PP)
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Regulations
- FDA 21 CFR 177.1810
- Regulation (EU) No 10/2011
- Technology
- CASE Ingredients
- Benefits and Features
- Good mechanical property at low temperature
- Excellent impact modifier for PP
- Adhesive for protect film
- Easy peal property
- Strong heat seal property
- Excellent stretch property
- Adhesive & Sealant Type
- Hot Melt Adhesive
- Certifications and Compliance
- FDA 21 CFR 177.1520
- Regulation (EU) No. 10/2011 (PIM)
- Compatible Polymers and Resins
- Polypropylenes (PP)
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 0.89 | g/cm3 | ISO 1183 |
| MFR at 230°C, 2.16kg Load | 13 | g/10 min | ISO 1133 |
| Hardness Durometer Type A | 67 | Shore A | ISO 7619 |
| Tensile Strength Dumbbell: Type 1A 500 mm/min | 11.8 | MPa | ISO 37 |
| Elongation Dumbbell: Type 1A 500 mm/min | 700 | % | ISO 37 |
| 300% Tensile Stress | 2.5 | MPa | ISO 37 |
| Styrene | 20 | — | Asahi Kasei Method |
| Ethylene-Butylene Ratio | 80 | — | Asahi Kasei Method |
