Dynasylan® SIVO 110
- Chemical Family
- Siloxanes
Dynasylan® SIVO 110 stands as a versatile, virtually VOC-free, water-borne sol-gel system. It integrates organofunctional silanes with nanoscale SiO2 particles. This product, available as an opaque to milky, colorless to slightly yellow, low-viscosity liquid, can be diluted in water and common organic solvents. Dynasylan® SIVO 110 features reactive silanol groups and Si-bonded epoxy-based organic functionalities.
Product families
- Industrial Coatings
Other characteristics
- Brand
- Dynasylan
- Functions
- Binder, Binder & Resin, Surface Modifier
- Labeling Claims
- Low VOC, VOC-free
- Low VOC
- VOC-free
- Compatible Substrates & Surfaces
- Aluminum, Metal, Steel
- Markets
- Paints & Coatings
- Appearance
Opaque to milky. colorless to slightly yellow. low viscous liquid.
- Processing
Dynasylan® SIVO 110 can be mixed with water at any proportion.; Dilution in common organic solvents such as ethanol, isopropanol, butyl glycol or methoxy propanol is possible.; Dynasylan® SIVO 110 can be formulated with a variety of water-thinnable binders and other auxiliary agents such as Tego® Wet 280.; As of such e.g. a satisfactory compatibility with acrylate-based polymer dispersions has been achieved.; Nevertheless, the final formulation must be checked towards possible incompatibilities such as phase separation or precipitation.; Recommended procedures a.o. are storage or stress tests.; Upon addition of acids and bases the pH value of Dynasylan® SIVO 110 can be varied between 4 and 9.; These acid or alkaline additives must be selected with care as flocculation or gelation can occur in contact with certain substances.; For neutralization Dynasylan® SIVO 111 is strongly recommended.; For acidification phosphoric acid may be used.; For achievement of easy-to-clean properties Dynasylan® SIVO 112 is highly recommended.; Dynasylan® SIVO 110 must be protected against freezing temperatures.
- Shelf LIfe
- 12 months
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Packaging Type
- Drums
- Totes (IBC)
- Application Methods
- Air Knife Coating
- Spray
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| pH | approx. 4.3 | — | DIN 19268 |
| Density | approx. 1.14 | g/cm³ | DIN 51757 |
| Viscosity | approx. 7 | mPa.s | DIN 53015 |
| Flash Point | min. 95 | °C | DIN EN 22719 |
| Color | max. 300 | mg Pt- Co/l | ISO 6271 |
| Solid Content | approx. 35 | % | 3g/2h 105°C |
| Boiling Point | approx. 96 | °C | ASTM D-1120 |
