VESTAKEEP® 5000 FP
- Chemical Family
- Polyether Ether Ketone (PEEK)
VESTAKEEP® 5000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. This versatile material can be used as a basic resin or in blends with different additives for manufacturing compression molding parts. The semi-crystalline polymer offers superior thermal and chemical resistance, making it suitable for demanding applications. VESTAKEEP® 5000 FP exhibits low flammability, ensuring enhanced safety. It is supplied as a powder in 10 kg boxes with moisture-proof polyethylene liners, providing convenient and reliable storage. Choose VESTAKEEP® 5000 FP for its exceptional properties and versatility in manufacturing compression molding parts. Experience the reliability and performance of this high-viscosity powder in your specific applications.
Properties
- Physical Form
- Powder
Product families
Applications
- Aerospace & Aviation
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- VESTAKEEP
- Polymer Name
- Polyetheretherketone (PEEK)
- Color (Properties)
- Natural
- Materials Features
Abrasion Resistant, Acid Resistant, Alkali Resistant, Chemical Resistant, Dimensional Stability, Flame Resistant, Good Thermal Stability, High Stiffness, High Strength, High Viscosity, Hydrocarbon Resistant, Low Flammability, Oil Resistant, Salt Water/Spray Resistant, Semi Crystalline, Solvent Resistant, Unreinforced, Water Resistant, Wear Resistant
- Processing Methods
Compression Molding, Electrostatic Spray Coating, Extrusion, Injection Molding, Sintering
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Shelf LIfe
- 2 years
- Flame Rating
- IEC 60695-11-10 V0
- Technology
- Plastics
- Packaging Type
- Boxes
- Benefits
VESTAKEEP® 5000 G can be used as liners for down- hole tubing in injection and production wells under demanding conditions that include High Pressure High Temperature (HPHT) and chemical resistance. Injection wells can include Water Alternating Gas (WAG) as an Enhanced Oil Recovery (EOR) method, where the gas phase has a very high CO2 content and high pressure. Thermoplastic lined pipes are excellent for replacing expen- sive metallic corrosion resistant alloys (CRA) and clad pipes. Overall, thermoplastic liners reduce well maintenance frequency and operating costs, thereby increasing the economics of oil wells.
- Color
- Natural
- Material Features
- Abrasion Resistant
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Dimensional Stability
- Flame Resistant
- Good Thermal Stability
- High Stiffness
- Storage Condition
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
- Packaging Information
VESTAKEEP® 5000 FP is supplied as powder in 10 kg boxes with moisture-proof polyethylene liners.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Plastics and Elastomers End Uses
- Aerospace Applications
- Automotive Applications
- Cable Insulation
- Compressor Components
- Electrical/Electronic Applications
- Packing Rings
- Seals
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Compression Molding
- Electrostatic Spray Coating
- Extrusion
- Injection Molding
- Sintering
Technical data
Table 1 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 493000 | psi | ISO 527 |
| Tensile Strength | 13800 | psi | ISO 527 |
| Yield Stress | 13800 | psi | ISO 527 |
| Yield Strain | 5 | % | ISO 527 |
| Stress at Break | 12300 | psi | ISO 527 |
| Nominal Strain at Break (ɛtb) | 40 | % | ISO 527 |
| Charpy Notched Impact Strength (+23°C) | 4.28 | ftlb/in² | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 3.81 | ftlb/in² | ISO 179/1eA |
Table 2 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.3 | g/cm³ | ISO 1183 |
| Moisture Content | 0.29 | wt.-% | ISO 15512 |
Table 3 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature | 644 | °F | ISO 11357-1/-3 |
| Vicat Softening Temperature A (10 N, 50 K/h) | 635 | °F | ISO 306 |
| Vicat Softening Temperature B (50 N, 50 K/h) | 581 | °F | ISO 306 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Parallel) | 3.33e-05 | in/in/°F | ISO 11359-1/-2 |
Table 4 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity (pV) | min. 1E13 | Ohm*m | IEC 62631-3-1 |
| Relative Permittivity (1MHz) | 2.8 | — | IEC 62631-2-1 |
| Electric Strength (AC, S20/P50) | 406 | V/mil | Sim. to IEC 60243-1 |
| Comparative Tracking Index (Test Solution A, 50 Drops Value) | 200 | — | IEC 60112 |
Table 5 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density (Powder) | 250 | g/l | EN ISO 60 |
| Particle Size D(50) | 60 | μm | ISO 13320, DIN ISO 8130-13 |
Table 6 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume Flow Rate (at 716°F, 11lb) | 7 | cm³/10min | ISO 1133 |
| Molding Shrinkage (Parallel) | 0.9 | % | ISO 294-4, 2577 |
| Molding Shrinkage (Normal) | 1.1 | % | ISO 294-4, 2577 |
Table 7 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning Behavior (at Thickness 0.1260 in.) | V-0 | class | IEC 60695-11-10 |
| Glow Wire Flammability Index (at Thickness 0.0787 in.) | 1760 | °F | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at Thickness 0.0787 in.) | 1560 | °F | IEC 60695-2-13 |
