To catalogue

T-PRO® 200

Chemical Family
Acrylics & Acrylates

T-PRO® 200 is acrylic copolymer specially formulated for non-traffic dust control applications, designed to form a flexible and durable skin over all soil surfaces. The product coats and seals the soil surface while binding transient particles as they land. It can be applied in all climates and dries quickly for rapid encapsulation of particulates and bonding to soil surface. T-PRO® 200 is not easily disturbed and can withstand foot and occasional light vehicular traffic. T-PRO® 200 provides excellent penetration characteristics and quickly locks the surface into a wind resistive cap.

Properties

Physical Form
Liquid

Product families

Applications

Building & Construction — Infrastructure, Roads & Paving
  • Pavement Highways Roads & Bridges

Product Families

Ready-to-Use Products — Construction Materials
  • Other Construction Chemicals

Other characteristics

Brand
T-PRO
Features

Excellent Track Resistance Properties, Good Erosion Resistance, Non-Toxic, Water-based

Odor
Faint ester
Color
White
Markets
Building & Construction
Benefits

T-PRO® 200 can be used to effectively control particulate emissions on construction sites, solar farms, agricultural areas, landing fields, tailings stockpiles and many other areas.; The water/polymer dilution ratio can be varied to adjust the application longevity from as little as four months to as long as two years.; The product may be applied in a wide range of temperatures and with its quick drying technology, provides rapid control of dust and surface capping.

Shipping

The polymer can be shipped in 254 gallon (961 liter) totes. Shipping T-PRO® 200 does not require special handling or permits.

PACKAGING
258 gallon (976 liter) totes..
Limitations

Product performance is based on soil properties.; Some soils do not lend themselves to stabilization with polymers.; Performance criteria should be established at the beginning of the project to delineate limitations of the application as a function of project specific variables.

Miscible In
Water
Installation

Standard use of T-PRO® 200 requires a topical application of a sprayed in-place polymer solution over a prepared surface. The application requires a minimum of 24 hours of cure time depending on weather conditions. The topical installation may involve a single spray-on application or several successive applications with varying polymer concentrations based on the infiltration characteristics of the soil.

Technology
Ready-to-Use Products
Packaging Type
Totes (IBC)
Labeling Claims
  • Environmentally Friendly
  • Non-Corrosive
  • Non-Flammable
  • Non-Hazardous
  • Non-Toxic
Material Features
Good Erosion Resistance
Handling

When storing, keep product from freezing and direct sunlight. T-PRO® 200 should be stored in temperatures ranging between 40˚F and 95˚F (5°C and 35°C) for best performance and to prevent separation.

Technical data

Table 1 of 1

8 rows
CharacteristicValueUnit
Relative Density8.9—
pH7.5 - 9.0—
Viscosity800.0mPa
Total Solids45 - 47%
Specific Gravity1.0—
Minimum Film Form Temperature23.0°C
Particle Size0.1μm
Glass Transition Temperature28.0°C

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.