T-PRO® 400HT
T-PRO® 400HT is a high-strength latex co-polymer designed specifically for high temperature film formation and arid climates. T-PRO 400HT polymer develops high compressive strength when mixed with soil and provides excellent abrasion resistance when used as a topical seal coat in wear course stabilization. It is highly water resistant when fully cured and stable under wet conditions, like all Terratech polymer products. It does not breakdown or leach and provides long term stabilization of fines in base materials.
Properties
- Physical Form
- Liquid
Product families
- Pavement Highways Roads & Bridges
Other characteristics
- Brand
- T-PRO
- Features
Combustion Resistant, Easy Film Formation, Good Abrasion Resistance, Good Compressive Strength, Good Erosion Resistance, High Strength, High Temperature Performance, Non-Toxic, Water Resistant, Water-based, Wear Resistant
- Odor
- Characteristic
- Color
- White
- Markets
- Building & Construction
- Shipping
The polymer can be shipped in 55 gallon (206 liter) drums or 258gal (976 liter) totes. Shipping T-PRO 400HT does not require special handling or permits.
- PACKAGING
- 258 gallon (976 liter) totes..
- Limitations
Product performance is based on vehicular traffic, soil properties, and proper drainage on and adjacent to the road surface. Some soils do not lend themselves to stabilization with polymers and exhibit poor performance in long term applications. Performance criteria should be established at the beginning of the project to delineate limitations of the application as a function of project specific variables. If questions arise, check with Terratech technical department prior to use.
- Miscible In
- Water
- Installation
The Terratech design team focuses on each client and each project individually to develop protocols that suit the job and the site conditions. Terratech designs, tests and develops the best methodology for each project to meet the performance objectives. Based on project performance objectives, there are two primary means of polymer application, infused and topical.; The infused application involves the mechanical intermixing of liquid polymer solution with the soil subgrade to a single lift thickness of 4 to 6 (8 to 15 cm) inches which is then compacted in place and left to cure for a minimum period of 72 hours, based on temperature and other ambient conditions. The topical application consists of a sprayed in-place polymer solution over a prepared subgrade. The application requires a minimum of 24 hours of cure time.; The topical installation may involve a single spray-on application or several successive applications with varying polymer concentrations based on the infiltration characteristics of the soil profile.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Totes (IBC)
- Labeling Claims
- Environmentally Friendly
- Non-Corrosive
- Non-Flammable
- Non-Hazardous
- Non-Toxic
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Vapor Pressure (20°C) | 17.0 | mmHg |
| pH | 6.5 - 9.5 | — |
| Viscosity (Estimated) | max. 500 | cSt |
| Total Solids | min. 50 | % |
| Specific Gravity | 0.95 - 1.10 | — |
| Minimum Film Form Temperature | 18.0 | °C |
| Particle Size | 125.0 | nm |
