To catalogue

SUPER SAP® CCR/CCF

CASE Ingredients Features
Low Viscosity

Super SAP® CCR/CCF is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Properties

Physical Form
Liquid

Identification

CASE Ingredients Functions
Binder & Resin

Product families

Applications

Applications
  • Paints & Coatings — Other Paints & Coatings Applications; Consumer Goods — Stationery; Art & Office Supplies
Building & Construction — Building Materials
  • Interior Fixtures
Adhesives & Sealants — DIY & Consumer
  • Craft & Hobby
Electrical & Electronics — Packaging & Assembly
  • Potting Compounds
Paints & Coatings — Specialty Coatings
  • Other Specialty Coatings

Product Families

CASE Ingredients — Resins & Binders
  • Epoxies

Other characteristics

Brand
SUPER SAP
End Uses

2K (2 Component) Adhesive, 2K (2 component) Coating, Epoxy Adhesive, Epoxy Coating, Epoxy Sealant

Features
Low Viscosity
Glass Transition Temperature (Tg)
50.5596 - 50.5596 °C
Markets
  • Adhesives & Sealants
  • Building & Construction
  • Consumer Goods
  • Electrical & Electronics
  • Paints & Coatings
Coating Type
  • 2K (2 component) Coating
  • Epoxy Coating
Technology
CASE Ingredients
Labeling Claims
Bio-based
Application Methods

When working at higher temperatures, make smaller pours to avoid excessive exotherm. Epoxy cures at lower temperatures.; Small castings will benefit from a post-cure of 100° F (38°C) for 24 hours to assure full cure.; For best results, measure the two components by weight within 5% of the recommended mix ratio.; Always mix product for at least two minutes, scraping the container to ensure complete mixing.; Use products in a controlled environment. Avoid high humidity and cold temperatures.; Amine blush, a by-product of the curing process, appears as a wax-like film cured epoxy and is more noticeable in cool, moist conditions. It can clog sandpaper and inhibit subsequent bonding. Blush is water-soluble and easily removed with clean water (not solvent) and an abrasive pad.; For good adhesion, epoxy bonding surfaces should be clean, dry, and sanded.; If unfamiliar with the product, create smaller test samples before starting a larger-scale project.

Adhesive & Sealant Type
  • 2K (2 Component) Adhesive
  • Epoxy Adhesive
  • Epoxy Sealant
Certifications and Compliance
  • USDA BioPreferred
  • USDA Certified Biobased
Compatible Polymers and Resins
Epoxies (EP)

Technical data

Table 1 of 1

21 rows
CharacteristicValueUnitMethod
Tensile Modulus448000PsiASTM D638
Tensile Strength8140PsiASTM D638
Elongation6%ASTM D638
Flexural Modulus390000PsiASTM D790
Flexural Strength11850PsiASTM D790
Compression Strength12380PsiASTM D695
Tg Ultimate123°FDSC, midpoint
Hardness70 - 80—Shore D
Mix Ratio (by volume)2:1——
Mix Ratio (by weight)100:43:00——
Viscosity A at 77°F2160——
Viscosity B at 77°F30——

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.