Armorchock™ Chocking Compound
- Chemical Family
- Epoxy & Epoxy Derivatives
Armorchock™ Chocking Compound is a high strength, two-part epoxy-based inert filled grouting material. Armorchock was designed and engineered to meet chocking and supporting requirements for machinery and critical alignment installations involving equipment such as compressors, turbines, gas and diesel engines, etc.
Product families
Applications
- Other Industrial Applications
Product Families
- Mortar & Grouts
Other characteristics
- Brand
- Armorchock
- Features
Acid Resistant, Chemical Resistant, Excellent Leveling Properties, Fast Cure, Filled, Grease Resistant, High Flow, High Strength, Improves Physical Properties, Oil Resistant, Pourable, Salt Resistance, Solvent Resistant, Steam Resistant, Water Resistant
- Mixing
1 The pot life of Armorchock is short. Only mix a quantity of Armorchock that can be used before hardening begins. DO NOT mix Armorchock until sealing and damming have been completed. 2 Armorchock part A (resin) is provided in an oversized container which provides free space to accommodate the addition of the Armorchock part B (cure) and to provide sufficient mixing space. Add Armorchock part B to Armorchock part A. Pour the entire contents of the part B container into the part A container. 3 Mix at 100 rpm to 200 rpm with a powered mixing blade for three (3) to four (4) minutes. Take care to avoid splashing or incorporating air into the mixture.
- Markets
- Industrial
- Warning
- Causes eye irritation.
- May cause allergic skin reaction.
- Avoid breathing vapor or mist
- Do not get into eyes, on skin or clothing.
- PACKAGING
Armorchock is a two-component system that is available in a 265 cubic inch kit.
- Advantages
Provides deeper pour capabilities. Retains more of its physical properties at higher operating temperatures. Excellent flow and self-leveling characteristics. Easy mixing, pre-measured components. Excellent chemical resistance. Can be placed at temperatures as low as 50 °F Rapid cure – minimum down time. 100% load bearing.
- Shelf LIfe
The shelf life of Armorchock is more than 1 year.
- Application
1 Provide a form that is 0.75″ higher than the top of the chock and 0.75″ wider than the chock so as to provide a material reservoir and head. This additional space will reduce voids and air entrapment in the pour. 2 Pour mixed Armorchock into forms. When pouring Armorchock do not scrape unmixed material from the side of the mix container into the chock area.
- Technology
- Ready-to-Use Products
- Chemical Resistance
Armorchock is resistant to strong caustics, mild acids, oils, grease, water, steam, salts and solvents. Contact the Wil-Cor, Inc. Technical Department for chemical resistance in specific service conditions.
- Surface Preparation
All surfaces (grout bed, sole plates) should be smooth, clean and free of oil. The mainframe surface should be smooth, bright metal. Sharp frets should be ground smooth and any voids should be filled with Armor Plate 990 Epoxy Putty.
- Freight Classification
National Motor Freight Armorchock part A (resin): Chemicals No I Armorchock part B (cure): Chemicals NOBIM
- Ready to Use Product Features
- Acid Resistant
- Chemical Resistant
- Excellent Leveling Properties
- Fast Cure
- Filled
- Grease Resistant
- High Flow
- High Strength
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color (Part A (Resin)) | Black | — | — |
| Color (Part B (Cure)) | Amber | — | — |
| Color (Part A & B Mixed (Cured)) | Black | — | — |
| Consistency | Flowable/Self-Leveling | — | — |
| Specific Gravity | 1.66 | — | — |
| Pot Life (60 °F) | 50.0 | minutes | — |
| Pot Life (80 °F) | 15-20 | minutes | — |
| Pot Life (90 °F) | 2022-10-15 | minutes | — |
| Cure Time (50 °F) | 48.0 | hrs | — |
| Cure Time (70 °F) | 18.0 | hrs | — |
| Cure Time (above 70 °F) | 12.0 | hrs | — |
| Pour Depth | 1.25″ - 2.75″ | — | — |
