APCM DA 4080
- Chemical Family
- Epoxy & Epoxy Derivatives
APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
- Glazing & Window Elements
- Other Building Envelope & Roofing Applications
- Shingles & Tiles
- Fence Decks & Rails
- Interior Fixtures
- Other Building Materials
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
- Equipment & Parts
- Other Industrial Applications
- Tooling & Moldmaking
- Other Infrastructure Applications
- Pavement Highways Roads & Bridges
- Implants & Prosthetics
- Medical Devices & Assemblies
- Advanced Materials
- Body Armor
- Refining & Gas Processing
- Housings & Enclosures
- Other Parts & Components
- Printed Circuit Boards (PCBs)
- Other Power Water & Utilities Applications
- Power & Utilities
- Renewable Energy
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
- Thermoset Prepregs
Other characteristics
- End Uses
- Tanks
- Functions
- Prepreg
- Polymer Name
- Epoxy Resins & Compounds
- Processing Methods
- Prepreg Processing, Vacuum Bagging
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Storage
Store material in a contaminate free container and store at O degrees F for extended storage. For shorter storage time requirements store at 40 degrees F, this enables quicker stabilization times.
- Cure Time Cycle
The recommended cure cycle for DA 4080 and DA 4082 Prepregs is one hour at 200°F at 20 psi.
- Shelf LIfe
1 Year (0°F in a Sealed Container), 6 Months (40°F), 20 Days (75°F)
- Technology
- Composite Materials
- Composites End Use
- Tanks
- Material Features
- High Flow
- Composite Materials Functions
- Prepreg
- Composites Processing Methods
- Prepreg Processing
- Vacuum Bagging
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Form | Moderate tack resin on woven fabric | — |
| Carrier | Any commercial woven fabric | — |
| Color | Off White | — |
| Resin | Content may be specified by customer | — |
| Volatiles | max. 1 | % |
| Separator | Release paper and poly film | — |
| Standard Roll | 750 square feet at 50 inches wide | — |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Tensile Strength | 50000 | psi |
| Tensile Modulus | 3.2 X 106 | psi |
| Flexural Strength | 75000 | psi |
| Flexural Modulus | 3.2 X 106 | psi |
| Compressive Strength | 55000 | psi |
| Short Beam Shear | 9000 | psi |
