Armor SC25
Armor SC25 is a high solids, water based Siliconate water repellent sealer that penetrates deep into the concrete surface where it chemically reacts to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor SC25 are more resistant to the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and salt damage, staining, mold and mildew, and efflorescence. It can be ap-plied to interior and exterior, vertical and horizontal surfaces. Product should only be used on unsealed white or very light concrete.
Product families
- Primers & Sealers
Other characteristics
- Brand
- Armor
- Features
Breathable, Cost Effective, Crack Resistant, Excellent Hydrophobic Properties, Excellent Water Repellency, Good Penetration, Low VOC, Microbe Resistant, Mildew Resistant
- Product Type
- Sealer, Waterborne Coating
- Sealer
- Waterborne Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Clean Up
Use warm water and soap. Dispose of containers in accordance with local and federal regulations.
- Coverage
Note: Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. Two coats are suggested for even coverage and appearance.
- PACKAGING
The Armor SC25 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
- Shelf LIfe
When properly sealed and stored, the shelf life of the Armor SC25 is up to 1 year.
- Compliance
Can be applied to new concrete after all bleed water is gone, and surface can be walked on without marking.
- Technology
- Ready-to-Use Products
- Dry Appearance
- Invisible
- Wet Appearance
- Clear
- Product Removal
Armor SC25 penetrates deep into to the surface. Removal is not recommended.
- Benefits and Features
Will maintain the natural, unsealed look and feel of the substrate; Will provide up to 3-5 years of life before the need for a recoat; Breathable, low VOC.; Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining; Will reduce the formation of mold and mildew; Will reduce freeze-thaw and salt damage; Will reduce the movement of moisture through the concrete pores; Cost effective—requires only 1 coat
- Application Methods
- Spray
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Alkalinity Resistance | Excellent | — |
| Application Temp | 45 - 85 | °F |
| Blush Resistance | Good | — |
| Concrete Adhesion | Excellent | — |
| Coverage (Porous Surfaces) | max. 175 | Ft²/Gallon |
| Coverage (Smooth Surfaces) | max. 200 - 225 | Ft²/Gallon |
| Drying Time | 1 - 2 | hours |
| Foot Traffic | 12 - 24 | hours |
| Re-Coat Time | No recoat | — |
| Solids | 20.0 | % |
| VOC Content | max. 0 | g/l |
| Wheel Traffic | 24 - 48 | hours |
