Armor WL550
Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural stone where a color enhancement is desired.
Product families
Applications
- Fence Decks & Rails
- Structural Components
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Armor
- Features
Breathable, Consistent High Quality, Durable, Excellent Water Repellency , High Gloss, Low Absorption, Low VOC, Microbe Resistant, Mildew Resistant, UV Resistant
- Product Type
- Sealer, Solventborne Coating
- Sealer
- Solventborne Coating
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Clean Up
Use Xylene. Dispose of containers in accordance with local and federal regulations.
- Coverage
Note: Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. Two coats are suggested for even coverage and appearance.
- PACKAGING
The Armor WL550 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
- Shelf LIfe
When properly sealed and stored, the shelf life of the Armor WL550 is up to 1 year.
- Compliance
- Meets OTC, CARB, LADCO & SCAQMD VOC restrictions
- Dried coating is USDA accepted
- Technology
- Ready-to-Use Products
- Dry Appearance
- Invisible
- Wet Appearance
- Clear
- Product Removal
Armor WL550 penetrates deep into to the surface. Removal is not recommended.
- Benefits and Features
Will enhance the natural coloring of the substrate to make it look wet; Will provide up to 3-5 years of life before the need for a recoat; Breathable, low VOC.; Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining; Will reduce the formation of mold and mildew; Will reduce freeze-thaw and salt damage; Won't leave behind a visible surface film
- Application Methods
- Roller
- Spray
- Suggested Applications
Poured, broom finished, and troweled concrete.; Pavers, brick, and block.; Aggregate, natural stone, unglazed tile.; Driveways, walkways, and stairs.; Pool decks and patios.; Garage, warehouse, and basement floors and walls.; Car ports, pole barns, retail and restaurant floors.
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Alkalinity Resistance | Excellent | — |
| Application Temp | 45 - 85 | °F |
| Blush Resistance | Excellent | — |
| Concrete Adhesion | Excellent | — |
| Coverage (Porous Surfaces) | max. 175 | Ft²/Gallon |
| Coverage (Smooth Surfaces) | max. 200 - 225 | Ft²/Gallon |
| Drying Time | 1 - 2 | hours |
| Foot Traffic | 12 - 24 | hours |
| Re-Coat Time | Single coat | — |
| Solids | 40.0 | % |
| VOC Content | Low | — |
| Wheel Traffic | 24 - 48 | hours |
