M.G. Polyblends RFM-50
M.G. Polyblends RFM-50 has developed foaming agent masterbatch based on Exothermic blowing agent. This blowing agent is properly dispersed in a polyolefinic resin along with some specialty chemicals which helps in creating a very fine cell structure in Rotomolded LLDPE tanks. Since our Roto foam masterbatch is in pulverized form and hence there is saving in pulverization cost to our customer. A case study report is attached herewith for your reference and better understanding of our product.
Properties
- Physical Form
- Masterbatch
- Powder
- Solid
Product families
Applications
- Equipment & Parts
Product Families
- Processing Aids
- Additive Masterbatches
- Processing Aids
Other characteristics
- Carrier
Polyolefins, Resin-based, Thermoplastic Polyolefins (TPO); Polyolefins; Resin-based; Thermoplastic Polyolefins (TPO)
- Functions
- Foaming Agent
- Processing Methods
- Rotational Molding
- Compatible Polymers & Resins
- Linear Low Density Polyethylene (LLDPE)
- Markets
- Industrial
- Benefits
- Reduce Weight Strength ratio
- Improve rigidity
- Thermal Insulation
- Excellent Impact Strength
- PACKAGING
- Material is packed in 20 kg HDPE Woven Sacks
- Appearance
- Yellow polymeric pulverized powder
- Highlights
Foaming agents are the additives which evolve gas through chemical reactions or through thermal decomposition. This gas creates cell structure in the polymer matrix. Foaming agents are of two types, Exothermic blowing agent and Endothermic blowing agent.
- Properties
Very fine closed cell structure Better surface appearance Direct dosage in final formulation
- Technology
- Elastomers
- Plastics
- Carrier Resin
- Polyolefin
- Packaging Type
- Bags
- Recommended Usage
- 1-5% of the weight of foamed /middle layer
- Material Features
- Dimensional Stability
- Good Impact Strength
- Good Rigidity
- Good Surface Appearance
- High Strength to Weight Ratio
- Shorter Cycle Time
- Recommended Temperature
- 190- 220 degree centigrade
- Compatible Polymers and Resins
- Linear Low Density Polyethylene (LLDPE)
- Plastics and Elastomers End Uses
- Tanks
- Plastics and Elastomers Functions
- Foaming Agent
- Plastics and Elastomers Processing Methods
- Rotational Molding
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | 0.572 | gm/cc |
| Foaming Temperature (In Hot Air Oven) | 200.0 | °C |
| Moisture Content | max. 0.02 | % |
