M.G. Polyblends Antistatic Masterbatch
M.G. Polyblends Antistatic Masterbatchis developed by M.G. Polyblends Antistatic masterbatch based on a new generation, high activity Nitrogen-free antistat additive. It specifically effective in providing static electricity control in polyolefins. It's efficiency is measured by determining the surface resistivity of the plastic surface in which this masterbatch has been used.
Properties
- Physical Form
- Granules
- Masterbatch
- Solid
Product families
Applications
- Consumer Goods — Housewares
- Other Packaging Materials
Product Families
- Surface Modifiers
- Additive Masterbatches
- Surface Modifiers
Other characteristics
- Carrier
- Resin-based, Thermoplastic Polyolefins (TPO)
- Resin-based
- Thermoplastic Polyolefins (TPO)
- Functions
- Anti-Blocking Agent, Anti-Static Agent
- Labeling Claims
- Food Contact Acceptable, Nitrogen-free
- Food Contact Acceptable
- Nitrogen-free
- Compatible Polymers & Resins
High-Density Polyethylene (HDPE), Linear Low Density Polyethylene (LLDPE) , Low-Density Polyethylene (LDPE), Polypropylenes (PP)
- Markets
- Consumer Goods
- Printing & Packaging
- PACKAGING
Material is packed in HDPE woven sacks of 25 Kgs.
- Appearance
- Translucent White Granules
- Highlights
Electrostatic charges are developed on the plastic surface because of its good electrical insulating property. These charges generally developed when surfaces are rubbed with each other or two very closely contacted surfaces are separated from each other e.g. during mold release, hot forming, removal from extrusion dies, stacking, automatic packaging etc. These charges creates problem such as dust attraction, fire & explosion hazard, difficulty in mold release, reduction of speed in packaging machine etc
- Technology
- Elastomers
- Plastics
- Carrier Resin
- Polyolefinic
- Packaging Type
- Bags
- Recommended Usage
Dosage level depends on the end use application (e.g. thickness of the product, polymer used etc.) and surface resistively required. General recommendations are as give below:-; 1-5% for LDPE/ LLDPE films; 3-15% for PP / HDPE molded items
- Material Features
- Anti-Static
- Fast Molding Cycle
- Food Contact Acceptable
- Good Mold Release
- Good Non-Yellowing Properties
- Good Thermal Stability
- Compatible Polymers and Resins
- High-Density Polyethylene (HDPE)
- Linear Low Density Polyethylene (LLDPE)
- Low-Density Polyethylene (LDPE)
- Polypropylenes (PP)
- Plastics and Elastomers End Uses
- Film
- Flexible Packaging
- Plastics and Elastomers Functions
- Anti-Blocking Agent
- Anti-Static Agent
- Performance in Various Plastics
- SURFACE RESISTIVITY(ohms)
