Franplast Fatty food USP Cl. VI
Franplast Fatty food USP Cl. VI is the new crystal clear TPE compound, based on SEBS, suitable for contact with fatty food in accordance with the European Regulations. It is completely compliant with 10/2011/EU and also 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3. This innovative compound is characterized by an extremely low migration level, when in contact with simulant D2 (olive oil). Chemiton for fatty food can be processed with conventional plastic processing technology such as injection molding and extrusion. Other important features are the extremely high resistance to alcohols and the sterilization by steam-autoclave.
Product families
Applications
- Medical Devices & Assemblies
- Tubing & Fluids Handling
- Non-Food Consumer Packaging
Product Families
- Styrenic Thermoplastic Elastomers (TPE-S)
Other characteristics
- Polymer Name
- Styrene Ethylene Butylene Styrene (SEBS)
- Processing Methods
- Coextrusion, Extrusion, Injection Molding
- Markets
- Healthcare & Pharma
- Printing & Packaging
- Processing
- Injection molding, 2k onto PP
- Extrusion, coextrusion with PP
- Key Features
New compound TPE-S based on HSBC, suitable to contact with fatty-food according to EU Regulations; Very low migration when in contact with simulant D2 (olive oil); Glass-like transparency; Wide service temperature range (can be sterilized with different methods, including autoclave); Completely plasticizer-free
- Main Markets
- Pharmaceutical industry (tubing, closures, etc.)
- Medical devices
- Food industry (sealing, closures, etc.)
- Technology
- Elastomers
- Labeling Claims
- Food Contact Acceptable
- Plasticizer-free
- Regulation Status
Fully compliant with 10/2011/EU (food contact); Compliant with 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3
- Material Features
- Alcohol Resistant
- Low Migration
- Steam Sterilizable
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); End-of-Life (ELV) Compliant; Other Certifications & Compliance; Regulation (EU) No. 10/2011 (PIM); Waste Electrical & Electronic Equipment Directive (WEEE)
- Plastics and Elastomers End Uses
- Closures
- Medical Devices
- Tubing
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 65 | Shore A |
| Density | 0.89 | g/cm³ |
