Franplast Special grade for film blowing
Franplast Special grade for film blowing is a TPE compound based on SEBS specially developed for film blowing of elastic films with layers of less than 100 μm (up to 50 μm). The opal/translucent compound can be enriched with gliding/release anti-blocking agents. Process setting and color methods are equivalent to PE film blowing. Our Chemiton for film is suitable for the production of elastic single-layer film for surgical drapes. We can also offer grades for improving the features of adhesive film in PE, especially for applications connected with baby and personal care (diaper and adult diapers).
Product families
Applications
- Medical Devices & Assemblies
- Other Medical Applications
- Surgical Instruments & Trays
- Baby Diapers
Product Families
- Styrenic Thermoplastic Elastomers (TPE-S)
Other characteristics
- Polymer Name
- Styrene Ethylene Butylene Styrene (SEBS)
- Additives Included
- Anti-Blocking Agent
- Processing Methods
- Blown Film Extrusion, Extrusion, Film Extrusion
- Markets
- Healthcare & Pharma
- Personal Care
- Appearance
- Opal/translucent
- Processing
Single layer film blowing, or multi-layer film blowing with all the most widely used poliolefinic polymers. Process setting and color methods equivalent to PE film blowing (processing temperatures between 150° C and 200° C)
- Key Features
Single layer soft elastic film, specially designed for the production of surgical patient drapes; Elastic film blowing with layer below 100 μm (down until 50 μm possible); With release and anti- blocking agents
- Main Markets
- Medical/Surgical
- Paramedical
- Senior & baby care
- Technology
- Elastomers
- Regulation Status
Compliant with 10/2011/EU and FDA 21 (Food contact); Compliant with 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); End-of-Life (ELV) Compliant; FDA 21 CFR Regulations; Regulation (EU) No. 10/2011 (PIM); Waste Electrical & Electronic Equipment Directive (WEEE)
- Plastics and Elastomers End Uses
- Film
- Medical Devices
- Medical/Healthcare Applications
- Multilayer Film
- Plastics and Elastomers Processing Methods
- Blown Film Extrusion
- Extrusion
- Film Extrusion
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Hardness | 50 - 60 | Shore A |
| Density | 0.9 | g/cm³ |
